Rally’s

[fleming442]

You could always get these:
https://www.yearone.com/Catalog/wheels/wheels/yearone-n90-wheels/n90-wheels

 

[Jeff Matlock]

You could always get these:
https://www.yearone.com/Catalog/wheels/wheels/yearone-n90-wheels/n90-wheels
View attachment 101096

That's not too bad, especially if I painted the inserts black. Thank you!

 

[Gwarren79]

Do those have the clips to hold the center caps on like the OP posted?

s10 cap

And el camino as OP showed

Back of El Camino Cap

So using an elcamino cap on S10 would work

 

[CaliWagon83]

Jeff Matlock, you’re looking probably at several thousand for the full custom route. They’d almost certainly be machined billet aluminum, as creating all new castings or stampings would be prohibitively expensive. Plus, you’ve got to factor in the design work and CAD programming for the machine. I’d guess you’re looking at about $4-5 grand all in on the full custom route. I could be off, but it’s going to be a chunk of change regardless.

 

[FastCraig]

 

[CaliWagon83]

Like fleming442 said, your best bet is probably to find an off-the-shelf wheel that’s close, and you could refinish or repaint to your liking.

 

[Gwarren79]

View attachment 101100

Can't even see this picture......{too small}

 

[FastCraig]

Can't even see this picture......{too small}

I tried to do full image 3 times. Dunno.

 

[1evilregal]

I don't really know what you'd be looking at as far as pricewise, but it more than likely won't be cheap.... I'd find a local car custom shop in your area and inquire if they or a shop they know has a aluminum cnc machine that could make some....

 

[TURNA]

Those caps have different mounting tabs the "blazer" has the locking tab on the outside to fit inside the hub hole.

The El Camino has the tabs that lock into a spring clip that is welded to the rim.

14 inch