Return line on steering box? size
- Thread starter 84cutspreme
- Start date
- Status
Mudweizer said:
Hmm. maybe that is my problem. The 88 Monte Carlo Pressure line I bought fit perfectly into the hole on the back of the GM Performan Serp Belt power steering pump pressure port and into only ONE of the two ports on the Box. I am guessing that is 16MM since it was smaller than the hole for what I think is the return. The bigger hole is the one toward the front of the car and further away from the blue shaft cover hook.
larryo454 said:
Update: I bought a 3/4 size fuel fitting elbow and that was also too small.
Is this Ebay item 18MM? is 18MM "bigger" than 3/4? That might be what I need!!!
larryo454 said:
I went to the auto store and bought this part. Just tried it and it is also small.
Does anyone know what size the return line is?
just back from the auto store. This time they sold me the part for a 80 Olds Cutlass return line.
It does not fit. Still small.
I took some numbers off my power steering box.
There is a BIG giant Z right about where the bigger of the two lines connects. There is also a "2600052" above that.
On the front of the steering box there is a round cover. ON that cover is "5693463"
Perhaps if I can identify the car the steering box came out of I will have better luck. I found it in a junk yard White Monte Carlo SS mid 80's G body.
It does not fit. Still small.
I took some numbers off my power steering box.
There is a BIG giant Z right about where the bigger of the two lines connects. There is also a "2600052" above that.
On the front of the steering box there is a round cover. ON that cover is "5693463"
Perhaps if I can identify the car the steering box came out of I will have better luck. I found it in a junk yard White Monte Carlo SS mid 80's G body.
- Status
Similar threads
BUILD THREAD
HVAC plastic vacuum lines
