Seperating the hood from the bracing

[RITTER]

I am wanting to create a custom cowl hood, using my original hood 8)

I am wanting to know if there is a solevent or something that will release the "blobs" that hold the bracing to the underside of the hood :?: or possibly a torch
I will be re-installing the bracing, so I do not want to destroy it :idea:

 

[CHRIS.O]

Man you do love those smilies. I would recommend a plasma cutter

 

[81Regal]

Some heat will work. When I used to skin hoods for a circle track car a sawzall worked good.

 

[RITTER]

I would recommend a plasma cutter

You should buy me one

 

[xitabl442]

A hacksaw blade will do it with some effort. You could also use a wire like cutting out a windshield. Heat will be the fastest, but if you plan on using the hood skin it may distort if you get it too hot.

 

[kustomss]

Let me know how it goes. I plan on doing the same thing on my Monte.

 

[1979ratrod]

i just did this a few days ago for my friends hood. it was a b*tch but some force and a sharp puddy knife worked good.