serpentine belt setup

[Cutty1]

would it be better choice to have serpentine belt system whether then the individual belts? and what do you need to do the swap which type pulleys, size belt ect

 

[clean8485]

There are a couple of threads on this subject already on this site, as well as other G body sites. If you use the search function, I'm sure that you'll be able to find all of the information that you're looking for.

 

[Cutty1]

so do i just need to look for any chevy truck or f-body and pull off the pulleys from it.., also i'm not going to have my a/c compressor so do i have to get a different pulley for that

 

[Clutch_Grabwell]

Yes, you'll need a delete pulley in place of the a/c compressor so the belt will route properly.

 

[Billys88SS]

90's chevy truck is what I got mine from. I just unbolted the ac lines from the back of the compressor and just using it as a pulley.

 

[455'ed80Regal]

you can use brackets off the 88-92 f-bodys. As far as the full size trucks go, i'm not sure what year they went to the aluminum brackets, but the last year for them is 95 model year v8. '96 they went to the vortec v8 and changed the brackets. If you can, grab everything off the donor vehicle. If you want, I have an extra set of f-body brackets . Might have the pulleys too. Have to look and see. If you're interested, lmk.

 

[dan2286]

If its an olds engine, you don't have many options. There is the march setup, but its expensive. Some chevy setups can fit with adapters but I don't know much about them.

 

[bill]

90's chevy truck is what I got mine from. I just unbolted the ac lines from the back of the compressor and just using it as a pulley.

Thats one heavy pulley!

 

[MrLightning]

90's chevy truck is what I got mine from. I just unbolted the ac lines from the back of the compressor and just using it as a pulley.

Thats one heavy pulley!

True Dat! might as well hook up the lines and get some cold air out of it for that matter!

 

[bill]

90's chevy truck is what I got mine from. I just unbolted the ac lines from the back of the compressor and just using it as a pulley.

Thats one heavy pulley!

True Dat! might as well hook up the lines and get some cold air out of for that matter!

For rizel!