does anyone kno or have an idea what it would cost to ship a rear end from phoenix to southern cali(ie area)
shipping question
- Thread starter kuruption109
- Start date
- Status
I bought some fenders from OPG back in 07, that were messed up. They told me I would have to crate them or pallet them to return ship.kuruption109 said:
The cost to do that and ship to OPG in Cali was more than the metal cost in the first place.
Most trucking Co. put a huge value on a pallet these days.
may want to consider Greyhound too.... but make sure you get it covered for loss or damage if you do!
I had a 68' Buick LeSabre rear shipped from Arizona to NYC by Consolidated Freight. Cost about $200 and they strapped it to a pallet and I had to pick it up at the depot in Brooklyn.
Think it's too heavy to ship via Greyhound. I have talked to a few guys who shipped bigger sheet metal body panels. Was looking at having floor pans shipped from Fl to Mi. Thought it was around 60 bucks if I remember correctly.
Greyhound has a shipping site you can run the numbers, but I think a r/e would be too heavy.
Greyhound has a shipping site you can run the numbers, but I think a r/e would be too heavy.
Summitracing charges about 150 or so and their shipping is cheap! I would guess privately your looking close to $200 range.
Fedex will most likely not take it. I tried to ship a transmission and it just made the size requirement. It cost me about $100 bucks to ship. Just to give an idea.
Fedex will most likely not take it. I tried to ship a transmission and it just made the size requirement. It cost me about $100 bucks to ship. Just to give an idea.
- Status
Similar threads
