The new guy 84 monte

[Ballboyracing]

What's up guys just a poor young dude with a bus of kids lol trying to build my 84 monte to be a beast. Right now it's a gen 1 355 sbc th350(lockup) it destroyed the non lock up trans... With a 7.5 3:73 rear behind it on 275/60/15 with 15x10 rims. Has 90/10 lakewood drag shocks all 4 corners I think the rears are 60/40 anyways. Probably going to go with a coan racing th350 swap just have the lock up in it so I can cruise it.motor doesn't even have 500 miles since build it keeps destroying everything and it's nothing special really. Flat top pistons 2 valve releases dart200cc iron eagle 64c.f. heads hyd. Flat cam with .510 .510 lift 1.5 aluminum roller rockers eagle 3.48 crank and 5.7 Rods long tube headers Holley 750 vac secoundary can't get my demon 750 dp to idle.

 

[Ballboyracing]

Here some pics

 

[Doug213xrj]

Welcome from West Michigan,

Doug

 

[Ballboyracing]

Thanks

 

[84slow]

Sounds like a nice motor.. I'd be happy with it instead of 3.8 lol... Welcome and I'm sure someone here can help

 

[406 Monte]

Welcome. Put a manual trans behind it 😀

 

[Ballboyracing]

Thanks guys it's getting either a tci or coan racing 350turbo next then comes a 9 inch swap

 

[Bar50]

Looks like a great car, sounds like you have fun with it too!

 

[lilbowtie]

Welcome & enjoy the crowd. Your engine is close to mine.

 

[Hot Rod]

Thanks guys it's getting either a tci or coan racing 350turbo next then comes a 9 inch swap

9 inch swap would be at the top of my list....I have blown up a few 7.5 diffs in my time, they're notoriously weak.