TKO 5-speed Crossmember??

[307 Regal]

I'm trying to find out what transmission crossmember I need to use if I want to install a TKO 600 (or 500). I did a forum search and didn't come up with anything other than a modified stock crossmember. I would like to get a dual hump model but I can't seem to find one for g-bodies that's listed as TKO compatible. Does a TKO transmission have the same mounting locations as a T5?

 

[307 Regal]

 

[DRIVEN]

I think you'll either need to modify one for a TH200/TH350 by extending the trans mount tab or slide it forward about 1.5" and redrill the frame holes. According to the numbers I found online the mount pad on the TKO is 15.8" from the face and the TH200/TH350 is 22.25".

 

[307 Regal]

I think you'll either need to modify one for a TH200/TH350 by extending the trans mount tab or slide it forward about 1.5" and redrill the frame holes. According to the numbers I found online the mount pad on the TKO is 15.8" from the face and the TH200/TH350 is 22.25".

I'm not too hip on transmission terms yet. Judging by the amount of inches, is the face the front of the trans where the bellhousing bolts on or the front of the bellhousing?

 

[DRIVEN]

The face (front) is where the transmission meets the bellhousing. I got my dimensional info here:
http://www.5speedtransmissions.com/tr-3550.html
http://www.maliburacing.com/auto_tranny_id.htm
Hope that helps.

 

[307 Regal]

Yes it does.