Trans Am wheels?

[3XBrownCutty]

does anybody have wheels like whats on this cutlass?

[/img]http://www.oldspower.com/vb/showthr...if the link doesnt work, my first try :oops:

 

[3XBrownCutty]

Sorry 😳

does anyone have wheels like these?

http://www.oldspower.com/vb/showthread.php?t=6055

are they from a trans am? if so what year and about how much would they cost?

 

[Coveted]

you mean the wheels from the second guys avatar

those are hott, i dont think they are Ta wheels tho.
Probably like a bbs wheel or something Ill host the pic in this thread for you.

 

[fodoimp]

look for Pontiac GTA wheels they usually run around 500-700 for a decent used set they are 16" and you ahve to run spacers to make them work

 

[85 Cutlass Brougham]

If you mean the White Cutlass, those are not GTA wheels, they are Enkei 92's from the 80's. I run them on my car in a 16x8 with 4 inch backspacing. They are actually pretty lightweight too. The GTA wheels have split offsets with the front and rear being different. They are no longer made and as such, are a swap meet item. The center caps are pretty hard to come by since they are made of a crappy plastic that dries out in sunlight and then breaks off the wheel. The GM wheels as seen on the GTA and GNX are actually nicer IMO. The centers are much nicer and have metal retainers behind them. Unfortunately, you will need 4 back wheels if you use the F car wheels because they are the only ones with a 4 inch backspacing.

I will also add that they are almost impossible to clean and detail due to all of the small holes in the spiders.