I have a 82 cutlass with a chevy 350 and a 350 trans i believe. i was gonna purchase a transgo manual valve body for my trans and it says one kit is for 350's with lockup and one for 350's without lockup. whats in mine. my cutty was originally purchased with a 307.
Trans help
- Thread starter franknitticutlass
- Start date
- Status
If you have a four pin connector on your transmission you have a 350c. Where it would be- I can't remember if it would be on the left or the right, but, that flat surface where the bell expands (where the pan bolts to it), that connector would be located somewhere in that general area. (up on the ledge)
- Status
Similar threads
