Well I have been having some issues with my 383 inluding but not limited to lol, oil leak out of the back of the intake, smoking, timing, running rich, and last night i was sick of the oil leak to start with so i started tearing apart and had the intake off in a matter of about 30 minutes, well got it all back together today, ended up going with edelbrock gaskets i believe 7201's torqued everything to spec, now what im wondering is how long should i let it sit before i crank it up and see if i got the distributor right? GOING TO WAIT UNTIL MORNING BEFORE I MESS WITH IT.
Next project for the weekend after getting it cranked up and making sure everything is A ok on that project is wiring in the MSD 6A box i picked up last week. I believe i have a "5 pin distributor" but i need to be sure for the wiring diagram, How do i verify? GOT THIS FIGURED OUT, SHOULD BE A EASY INSTALL
After the intake is good and my MSD 6A box is wired in i am going to play with the air/fuel mixture, any tips or how to's?
I figured since have a 3 day weekend i mine as well get the SS running right instead of sitting on the couch watching the tube. ANY help will be appreciated fella's!!!
Next project for the weekend after getting it cranked up and making sure everything is A ok on that project is wiring in the MSD 6A box i picked up last week. I believe i have a "5 pin distributor" but i need to be sure for the wiring diagram, How do i verify? GOT THIS FIGURED OUT, SHOULD BE A EASY INSTALL
After the intake is good and my MSD 6A box is wired in i am going to play with the air/fuel mixture, any tips or how to's?
I figured since have a 3 day weekend i mine as well get the SS running right instead of sitting on the couch watching the tube. ANY help will be appreciated fella's!!!
