3.8L Buick/ 200c, unknown rear. Getting tags Monday. A friend says I might see 30mpg. :shock:
I am kicking the idea around of changing it to a 200R4.
I am kicking the idea around of changing it to a 200R4.
What is your drivetrain?
- Thread starter mr hyde
- Start date
- Status
5.3 out of a 2003 tahoe.
heads pocket ported and milled .030
mild cam upgrade
comp 918 springs & hardened pushrods
edelbrock performer rpm intake & quick fuel carb
Long tube headers
Th-200-4r trans and 3.73 gears
No MPG calculation
heads pocket ported and milled .030
mild cam upgrade
comp 918 springs & hardened pushrods
edelbrock performer rpm intake & quick fuel carb
Long tube headers
Th-200-4r trans and 3.73 gears
No MPG calculation
Sbc 358,solid lifters,.500ish lift cam,unknown rebuilt heads that were sitting on a shelf for years,edelbrock torker single plane intake,holley 650 double pumper,long tubes with x pipe to old bullet mufflers.
Built turbo 350 w/reverse manual valvebody,tci street fighter converter 2800 stall
Built 7.5 10 bolt,c-clip eliminator's,moser axles,auburn posi,4.10 gears,1/2" studs.axles are soon to possibly change because i just snapped the splines off one side,and the other side was twisting.
Built turbo 350 w/reverse manual valvebody,tci street fighter converter 2800 stall
Built 7.5 10 bolt,c-clip eliminator's,moser axles,auburn posi,4.10 gears,1/2" studs.axles are soon to possibly change because i just snapped the splines off one side,and the other side was twisting.
- Status
