i sold my 7 series BMW and plan to put the rims i had on there on my GN the wheels are 22x9.5 and 22x11 the lug nut pattern is the same but i would like to know what size adapters i would need bcuz of the offset in the rear so they do not touch the frame. anyone else used a set of rims off a 7 series?
What size wheel adapters are needed to run 22inch 3pce 22x11
- Thread starter prez ken
- Start date
- Status
Re: What size wheel adapters are needed to run 22inch 3pce 2
I hate to burst your bubble, but youll need more than adapters. With a wheel that wide and the offset youll find yourself more than likely (99.9% possibility) need a frame notch and a mini tub. Lot more work than just throwing on a set of adapters.
I hate to burst your bubble, but youll need more than adapters. With a wheel that wide and the offset youll find yourself more than likely (99.9% possibility) need a frame notch and a mini tub. Lot more work than just throwing on a set of adapters.
Re: What size wheel adapters are needed to run 22inch 3pce 2
^^^^ x2 what he said.
mkiiisupra said:
^^^^ x2 what he said.
Re: What size wheel adapters are needed to run 22inch 3pce 2
It is my understanding 20x9 with 3/8 spacers is the largest wheel you can put on a Gbody, even with rubberband tires. I don't see these babies going on without some modifications.
It is my understanding 20x9 with 3/8 spacers is the largest wheel you can put on a Gbody, even with rubberband tires. I don't see these babies going on without some modifications.
Re: What size wheel adapters are needed to run 22inch 3pce 2
Not to piss off any of the "Donkers" on here.............. These car look like sh*t with these biga$$ wheels on them...JMO
Not to piss off any of the "Donkers" on here.............. These car look like sh*t with these biga$$ wheels on them...JMO
Re: What size wheel adapters are needed to run 22inch 3pce 2
so i guess none of the members have seen this done before, which i have...my GN is stock with new shocks and stiff stock coils, and i have search and seen BMW wheels being used with adapters on the rear and no frame notching so im sure somebody out there will know what size, but thanks for ur replys
so i guess none of the members have seen this done before, which i have...my GN is stock with new shocks and stiff stock coils, and i have search and seen BMW wheels being used with adapters on the rear and no frame notching so im sure somebody out there will know what size, but thanks for ur replys
Re: What size wheel adapters are needed to run 22inch 3pce 2
i put 22x9.5 with 255/30/22 tires on my previous cuttlass salon i used a 2 inch adapter on the rear none on the front.
i did have to roll the the lips the offset of the rims where a +15 the rims came off a x5.i didnt really need a 2 inch adapter,
i sold the car but there are pictures of the car still in my gallery,also that car was not lifted,stock 126k mile springs with new shocks.i just got some 22x9.5 with 245/30/22 tire on my regal turbo t.i put them on with a 1/4 inch spacer but i am
going to used 1.25 hub centric adapters on the rear this time.these rims have a +10 off set.i have seen other g bodys with
staggered 22's.
i put 22x9.5 with 255/30/22 tires on my previous cuttlass salon i used a 2 inch adapter on the rear none on the front.
i did have to roll the the lips the offset of the rims where a +15 the rims came off a x5.i didnt really need a 2 inch adapter,
i sold the car but there are pictures of the car still in my gallery,also that car was not lifted,stock 126k mile springs with new shocks.i just got some 22x9.5 with 245/30/22 tire on my regal turbo t.i put them on with a 1/4 inch spacer but i am
going to used 1.25 hub centric adapters on the rear this time.these rims have a +10 off set.i have seen other g bodys with
staggered 22's.
Re: What size wheel adapters are needed to run 22inch 3pce 2
if you use spacers get longer studs,stock studs are 41.1mm ,here are some part numbers for longer studs but i would not
use a spacer thicker than a 1/2 inch after that go with a 1 1/4 adapter with a 5x4.75 on 5x120 bolt pattern ,and get the fender lips rolled.part # 610-416 52.2mm long,610-323 54mm long,610-427 55.3 long these will work with a 1/2 spacer.
if you use spacers get longer studs,stock studs are 41.1mm ,here are some part numbers for longer studs but i would not
use a spacer thicker than a 1/2 inch after that go with a 1 1/4 adapter with a 5x4.75 on 5x120 bolt pattern ,and get the fender lips rolled.part # 610-416 52.2mm long,610-323 54mm long,610-427 55.3 long these will work with a 1/2 spacer.
- Status
