wideband

[awdblazer]

anyone have a wideband? or even a narrowband?
post some pics of what you have
thanks

 

[pontiacgp]

do you mean the band in a transmission or an 02

 

[awdblazer]

o2

 

[gbgn1]

Get a wide band- aem sells a great 2 1/16 gauge easy to install

 

[liquidh8]

I use the innovate LC-1 for my carbed cars, and I have the innovate MTX-L in the wagon for a permanent install, hooked up to the ECM for auto tune and datalogging.

 

[pontiacgp]

I have the AEM wideband, the AEM 02 sensor died I replaced it with a NGK NTK 24302 which is supposed to be more dependable

 

[Injectedcutty]

anyone have a wideband? or even a narrowband?
post some pics of what you have
thanks

I have an autometer sport comp 2-1/16" digital wideband with the harness and sensor. $100 + shipping, like new condition. This is the only pic i have right now....middle gauge.

 

[CWPottenger]

I use the innovate LC-1 for my carbed cars, and I have the innovate MTX-L in the wagon for a permanent install, hooked up to the ECM for auto tune and datalogging.

Are you just tracking AFr's or are you using a SSI-4 or Aux LMA-3 also to track multiple parameters

 

[liquidh8]

Are you just tracking AFr's or are you using a SSI-4 or Aux LMA-3 also to track multiple parameters

With the LC-1, I just track AFR while someone else drives. This way I can figure out if the carb is lean no tip in, cruise, WOT, etc. Kinda of a pain, but I do it all the time. I had an LC-1 installed on my Malibu wagon with the 350 and TBI w/nitrous, and datalogged everything and it was used WBo2 VE learns.

With the MTX-L, it's tied into my ECM on the turbo Buick, the EBL SFI-6, and is used for VE learns and real time tuning. I datalog every parameter, fuel pressure, AFR, MAP, RPM, etc.

Even if you were going to us the MTX-L for a DD car with a carb, it's nice to have. Same with the AEM or similar.

 

[awdblazer]

afr, just to tune my quadrajet