i have read where power windows will not interchange but what about power locks? there is a 4 door cutlass in the yard with power locks and my cutlass is a 2 door and was just curious if they would interchange. thanks for any help.
hey pat on the cs130 does your pigtail only have 2 wires? the one i got off a blazer only has 2 wires, 1 at F and 1 at L. from what i have read all i need to do is hook the L wire to the brown factory alternator wire and i should be good. is this the case with you? just wanting to check before i...
ok, you think i need to strip the self etching off and just spray epoxy over bare metal ( after i rough up the metal with something way rougher than 220) then do body work, then spray epoxy over the filler? thanks
ok i have been working on my olds and what i have done so far is i have cut out all of the bad spots that were rusted badly. then i welded in patches and ground down the welds. then i went over them with all metal filler. i just got done stripping the hood, trunk lid, and roof of the car with...
there is a decent 4 door cutlass in the local u pull it. it had a perfect dash so i bought it and read that it will work in my 2 door 86 cutlass. my question is what parts will interchange with these cars? what i am intersted in is the front windshield and back glass, windshield chrome trim...
hey man what paint did you use to paint this stuff? at the beginning of the thread you said rustoleum then later in the thread you said you used SEM. just curious becuase them parts turned out killer looking. your time, work and detail can be seen in your work, keep it up.
yeah i just pulled my doors to fix a small rust spot on the outside of the door. while i was inspecting my doors i noticed they are clean and rust free on the bottoms and insided. i also noticed my drain holes werent clogged. so i would agree that if the drain holes are not clogged that will...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.