Adhesive for fixing inner fenders

[Injectedcutty]

If you EVER do another, please do a step by step pictorial. Those Inner Fenders look SICK!!

Hutch

Will do Hutch, the original plastic welding was done before i really started documenting the build. I think there are a couple pics, I'll have to dig to see.

 

[oldsofb]

I think there are a couple pics, I'll have to dig to see.

 

[Clutch]

Will do Hutch, the original plastic welding was done before i really started documenting the build. I think there are a couple pics, I'll have to dig to see.

They came out awesome Scott I still think there the wrong color 🤣😂

 

[stuckincincy]

If the color doesn't matter, I've had good luck using 3M Rigid parts repair and SEM problem plastics repair on the plastic cladding on my Syclone, the 3M is blue and the SEM is tan. The 3M is available in 5oz tubes that you mix like JB weld, I believe the SEM only comes in cartridges. I had to make several repairs so I went with the 200ml cartridges. I did have to buy an applicator gun, but I was actually able glue a piece that had broken in half back together using a mesh backing for support. For the smaller cracks and holes i just used painters tape to give it a basic shape.

 

[Injectedcutty]

Could only find a couple pics. 1st is from initial teardown early 2012ish, 2nd is from November 2014 and after the main holes were filled but the ridges were still on the mounting flanges, then last 2 I just snapped. To the OP, sorry for the hijack, I'll be happy to answer any questions if you have them.

 

[shoedoos]

G-body Inner Fender Modifications - Hot Rod Regal

Welcome Back G-body enthusiasts! Front G-body inner fender modifications are the topic of this update. Hopefully this information will help a lot of Hot Rodders and G-body folks out there with plastic inner wheel wells for the front fenders. This information I am giving out is something I came...

hotrodregal.com

 

[UC645]

Could only find a couple pics. 1st is from initial teardown early 2012ish, 2nd is from November 2014 and after the main holes were filled but the ridges were still on the mounting flanges, then last 2 I just snapped. To the OP, sorry for the hijack, I'll be happy to answer any questions if you have them.

As if that engine bay that clean could hijack a thread. Although you’re inadvertently giving me ideas to stea- er, I mean copy

G-body Inner Fender Modifications - Hot Rod Regal

Welcome Back G-body enthusiasts! Front G-body inner fender modifications are the topic of this update. Hopefully this information will help a lot of Hot Rodders and G-body folks out there with plastic inner wheel wells for the front fenders. This information I am giving out is something I came...

hotrodregal.com

I’ve been trying to get on that site all day, kept sending me a database error

 

[86 Chevy El Camino SS]

Try looking at the Fusor products, they should have something.

Fusor Repair Adhesives

Fusor automotive repair adhesives are used for panel bonding, weld bonding and rivet bonding; plastic, finishing or cosmetic repair; and our seam sealing and sound control products duplicate OEM appearance on a variety of applications.

www.lord.com

Yup, I agree.

Lord Fusor products are the best.
JB weld on steroids!
You can find them on Amazon.
I was able to repair my door skin back to the door frame.
Sands great!