to the coil over guys

[L05edSS]

I'm new to coil overs, but I'm going with them for the front.

SSM COILOVER REINFORCEMENT PLATES

Coil-Over MountsSold in sets of 2. These plates built and designed by SSM offer the perfect landing for your coil-overs. The new muscle car coilover conversions offered by the spring companies use the lower shock t bar mount to support the entire weight of your car on a spot that was not...

southsidemachineperformance.com

I'm using these reinforcement plates with stock lower arms and TRZ uppers.

Regarding the coilovers, you can get a spring that goes in the stock spring pocket in the frame that won't require modification to the shock bolt area. Here is a kit that UMI sells : https://www.umiperformance.com/home...ront-coil-over-kit-double-adjustable-bearing/


I can't say this style spring is better, good or bad. But I'm about to find out lol.

you're new to as now have em or about to get em? so far every setup up i looked at are just like those springs which io is a good design cuz no mods have to be done. im beginning to lean towards alden cuz they dont have dual locking collars just 1 collar with a locking allen bolt. also thanks for the plates they look beefier than alden's & cheeper.

 

[UC645]

might be much for what i have but i like the idea.

It isn’t too much, even on a completely stock car. GM used to stick a cross bar on the rear of the frames up until 77 (IIRC) to make the frames stiffer.