What did you do to your non-G body project today? [2018]

Status
Not open for further replies.

Wraith

Royal Smart Person
Jan 13, 2013
1,599
4,747
113
DFW, TX
I know that g-bodies are our passion BUT seems we all have 500 other projects(motorcycles, houses, etc) going on at the same time.

I'm not doing a build thread but am currently working on a BMW R65ls for a neighbor. Tore it most the way down yesterday and dropped of the bodywork for new paint in Estoril Blue II to match his M performance 3 series.

Before


Today


The drop off

 
  • Like
Reactions: 8 users

Turbolq4

Royal Smart Person
Sep 25, 2017
1,732
4,207
113
Nampa Idaho
IMG_20171105_174827085.jpg
IMG_20171111_174832524.jpg
IMG_20171229_164701398.jpg
IMG_20180126_141137228.jpg
IMG_20180126_154924959.jpg
IMG_20180210_185933888.jpg
a small distraction from the car stuff. I HATE sheetrock!!
You can also see the lighting I installed in the shop over the same time period. First two are just some industrial construction lights. LED stuff is spendy but worth it.
 
  • Like
  • Winner
Reactions: 19 users

Turbolq4

Royal Smart Person
Sep 25, 2017
1,732
4,207
113
Nampa Idaho
Swapped the engine in my Accord. Replaced the upper door hinge on my 96 Powerstroke, PIA!! The Gbody stuff still seems to consume quite a bit of my time though.
IMG_20171208_191537260.jpg
none of this was today but you get the idea.
 
  • Like
Reactions: 4 users

Injectedcutty

G body LS mafia
Nov 24, 2014
6,057
22,807
113
Louisville, KY
View attachment 84864 View attachment 84865 View attachment 84867 View attachment 84868 View attachment 84870 View attachment 84871 a small distraction from the car stuff. I HATE sheetrock!!
You can also see the lighting I installed in the shop over the same time period. First two are just some industrial construction lights. LED stuff is spendy but worth it.
That's one heluva setup! I officially have garage envy!!! You definitely have the room and height for a lift or three.
 
  • Agree
  • Like
Reactions: 12 users

fleming442

Captain Tenneal
Dec 26, 2013
13,046
24,216
113
That's one heluva setup! I officially have garage envy!!! You definitely have the room and height for a lift or three.
No sh*t!!!!
When I started into this thread, I was just going to say that I split 2 truckloads of wood with the neighbor..... then, this guy!:wtf:
 
  • Haha
  • Like
Reactions: 2 users

ed1948

Royal Smart Person
Aug 6, 2016
1,286
1,613
113
Quinte West, Ontario
P1130568.JPG
P1130654.JPG
P1130810.JPG
 
  • Like
Reactions: 1 users

1evilregal

Comic Book Super Hero
Apr 23, 2009
3,056
4,357
113
Greensboro, NC
replaced the front pads/cleaned up the rotors on what is to be the new daily beater...chasing down a rubbing/grinding noise in what sounds like the front d/s wheel..
 
  • Like
Reactions: 3 users

Clutch

Geezer
Apr 7, 2017
5,183
10,900
113
Brick NJ
I worked on the square body crew. like I do every weekend in the cold. it's a long dark tunnel with a tiny bit of light at the end. I can just barely see it.
 
  • Like
Reactions: 1 users
Status
Not open for further replies.

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor