In-tank fuel pump that fits repro 22 gallon gas tank and Holley Sniper FI?

[lucky 1985]

I ordered this in-tank pump from Summit https://www.summitracing.com/parts/hly-12-306 but it hits baffles in my repro 22 gallon tank.

Any recommendations on a pump that will fit and work with my Holley Sniper?

TIA

 

[Streetbu]

Don't use a baffled tank with that. Use your stock carburetor style tank.

Oh and stock tanks are 18.1 gallon IIRC

 

[64nailhead]

Drain and flush the tank and cut the baffle out of the way.

 

[oldsmobile joe]

but it hits baffles in my repro 22 gallon tank

Do you have an el camino? We need to know what kind of car you have.

 

[lucky 1985]

Thanks guys.

1985 El Camino.

Streetbu & 64nailhead, the tank is a new repro of the optional 22 gallon tank. And I want an in-tank pump to avoid a loud in-line pump.

So I guess I might have to go with the stock 18 gallon tank with in-tank pump for stock FI application. I will do a search for this but if y'all know a good source let me know.

 

[wskirvin]

I used that 12-306 pump setup in my cutlass and works flawlessly. Holds 58-60PSI all the time. I'm using an unbaffled Spectra tank.

 

[Dixie Restoration Depot]

The sending unit that you posted is meant for a coupe or sedan tank, the El Camino tank uses a different sending unit. Here is a picture of an El Camino EFI sending unit.

 

[lucky 1985]

The sending unit that you posted is meant for a coupe or sedan tank, the El Camino tank uses a different sending unit. Here is a picture of an El Camino EFI sending unit. View attachment 200264

OK, thanks. I don't see an in-tank pump, is this only for in-line pumps?

 

[lucky 1985]

The sending unit that you posted is meant for a coupe or sedan tank, the El Camino tank uses a different sending unit. Here is a picture of an El Camino EFI sending unit. View attachment 200264

OK, Dixie Depot got me sorted on the sender/pump that will work with the 22 gal tank I bought.

Thanks for all the help!!

 

[Dixie Restoration Depot]

OK, thanks. I don't see an in-tank pump, is this only for in-line pumps?

I know you and I already spoke on the phone but if someone in the future has the same question, it will hold just about any GM style in-tank pump.