8
81cutlass
Comic Book Super Hero From Western MN
Latest activity Postings Media Albums About
-
-
881cutlass replied to the thread Pontiac OHC-6 SPRINT parts on fleabay.The OHC6 pontiac is one of the coolest looking engines of the 60's GM family. I almost bought one probably 10 years ago that came up...
-
-
8Take the smaller pulley with you - trust me. Your description of the fueling makes sense for a larger cam. Just keep it above 1900-2000...
-
881cutlass replied to the thread Does anyone here regret their auto to manual swap?.I put a t56 out of an F body behind my LS in my GP and have about 20,000 miles on the setup. The swap was a bit of a pain, mostly with...
-
82nd hit of the season sketchy prep. It went downhill from there as the track went downhill.
-
881cutlass replied to the thread BUILD THREAD 86 GP 2+2~Blown 6.0.Diddly squat update #4251.56 Put the shop back together Dug out one of the spare parts I had. I had traded a pair of decent grey belt...
-
-
881cutlass replied to the thread 4x4 4L80E to 2wd.https://dirtyhookerdiesel.com/i-24077230-ims-billet-short-shaft-4l80e-tail-housing-adapter.html?srsltid=AfmBOopBtt73Z6y0zJKgttlwfqWdT5iau...
-
8Same thing I do every year…
-
881cutlass replied to the thread electronic speedometer conversion.G van or C/K pickup/burb post 88 are your only options for factory swap parts I tried putting a G20 cluster in my GP gages but it was...
-
881cutlass replied to the thread BUILD THREAD 86 GP 2+2~Blown 6.0.Finished the wiring oops repair and took it to the coin op wash to remove the 16 months of mouse blood and urine. Also took it for a...
-
-
8That’s funny right there. Congrats on getting it running. No one will throw you out for running faster than your cert until you get...
-
881cutlass replied to the thread BUILD THREAD 86 GP 2+2~Blown 6.0.Ended up giving up on the idea of the spacer as there's only 1/8" between the blower and the hood and I'm not rebuilding my motor mounts...
-
-
881cutlass replied to the thread Xtreme Performance Transmissions?.I'd run away from the Aces EFI. It's tangentially related to FITECH and there are widespread reports of it being inconsistent, Aces...
-
881cutlass replied to the thread BUILD THREAD 86 GP 2+2~Blown 6.0.Ford Eaton GT500 like 2008 piece. Adapter plate on a cathedral LS lower tub. The IC and intake are all Maggie parts. I bought the upper...
-
881cutlass replied to the thread BUILD THREAD 86 GP 2+2~Blown 6.0.Hour here or there adds up. Clutch Bell housing and trans and exhaust is in Accessories and blower are on Started to route the...
-
-
881cutlass replied to the thread On the Cheap chasing an 8.50.Any news on getting in on Sick Summer or did you bail out on the wait list? Cool to see the updates and the Monte Cat-lo
-
8Those of you that have followed along with the car, you know that I’ve mentioned numerous times of changing goals……..because ‘it’s never...
-
8Some welding on the new intake. It’s not visible in the pcs of the 1/8 npt ports added in accessible areas - rather than underneath the...
-
8Still plugging away. I pulled the heads and swapped the cam to Stage 4 Lunati turbo cam. I’ve only started the motor and idled for a...
-
8As always - took longer than I thought it would lol. The powder coating turned great - as it should. Getting the damn enduro bumper...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
