I've never been able to get my passenger door power window switch to work in the down direction on my 2+2.
The drivers side switch controls the passenger window fine, up and down.
Passenger side switch will make the passenger window go up only. No down.
I have power to the passenger switch and I tested 4 different switches I have in my parts bin and all have the same result. Up, no down. I checked continuity between the power pin on the switch and the brown (down) and blue (up) pins in the down and up directions and all switches work like they should.
I can jump the power pin on the harness switch connector to the brown or blue wires going to the motor and ground the other wire to the door and the window goes up and down.
The switches all work and the wiring seems right but I can't figure out why it won't roll down with the passenger switch but is fine on the drivers switch.
Any thoughts?
I can't rationalize through the diagram how this is possible.
The drivers side switch controls the passenger window fine, up and down.
Passenger side switch will make the passenger window go up only. No down.
I have power to the passenger switch and I tested 4 different switches I have in my parts bin and all have the same result. Up, no down. I checked continuity between the power pin on the switch and the brown (down) and blue (up) pins in the down and up directions and all switches work like they should.
I can jump the power pin on the harness switch connector to the brown or blue wires going to the motor and ground the other wire to the door and the window goes up and down.
The switches all work and the wiring seems right but I can't figure out why it won't roll down with the passenger switch but is fine on the drivers switch.
Any thoughts?
I can't rationalize through the diagram how this is possible.