What did you buy for your G-body today? [2024]

Interested in those bump steer parts. Always struggled with that on this car.
I also interested in the receiver. I’ve been looking at some options. Torn between a nice big screen or a hidden Bluetooth deal.
Trying to plan out sound system for it. Thinking about getting the kick panel setup. The maybe the inserts in the side panels in the back seat, while deleting the package tray 6x9. Also undecided on subs, a couple 8’s or 10’s maybe or maybe just a single 12.
If you’re interested in a radio that looks period correct, but gets all the bells and whistles (provided your pockets are deep enough), check here:

They do make 1.5 Din radios, and they look correct enough for what our cars came with at a glance. But come with Bluetooth, hands free, amp pre outs, etc.

And don’t go with the kick panel speakers, too much risk of damage. Still regret modifying my parking brake pedal.

Door speakers would be a better option, imo. Just need to balance mounting depth with either a good component speaker set or a midrange/2-way.
 
Interested in those bump steer parts. Always struggled with that on this car.
I also interested in the receiver. I’ve been looking at some options. Torn between a nice big screen or a hidden Bluetooth deal.
Trying to plan out sound system for it. Thinking about getting the kick panel setup. The maybe the inserts in the side panels in the back seat, while deleting the package tray 6x9. Also undecided on subs, a couple 8’s or 10’s maybe or maybe just a single 12.
I'll definitely keep the forum posted once they're installed but for now I can give some numbers. UMI's bumpsteer kit sleeves are 9.2" long so I bought 9" long Afco radius rods @ $20 each to go with new inner tie rods (8.5" long from end to stud center). I measured the driver's side tie rod assembly on my El Camino to be 17.25" and these babies come in at 17" flat when fully shortened. It may be possible to substitute an inner tie rod stud (WM325) in place of the outer TR5000 stud for a cleaner install. There's also the option to drill the spindle to accept regular bolts and mount the heim on top if you can't adjust things high enough (which is a distinct possibility). The tapered spacers may prove to be completely unnecessary but each cost less than a candy bar, and while there were cheaper options for heim joints and shafts this still only set me back $116 shipped to my door.

Screenshot_20241114-031656~2.png

The BT receiver is the same brand as the 10" subs I got for under the front seats and is the size and shape of a standard rocker switch.

Screenshot_20241114-034747~2.png
 
Couple thingies from JTR fab.
Also have a couple things FB marketplace place deals I may get tomorrow. Very excited about those.
 

Attachments

  • IMG_7881.png
    IMG_7881.png
    446.4 KB · Views: 4
FB marketplace is a hell of a drug…
Neither of these were “listed” on marketplace. They were in the backgrounds of other listing.
As I was taught at a young age “ If you don’t ask, the answer will always be no.”
IMG_7889.jpeg
IMG_7890.jpeg
 
FB marketplace is a hell of a drug…
Neither of these were “listed” on marketplace. They were in the backgrounds of other listing.
As I was taught at a young age “ If you don’t ask, the answer will always be no.”
View attachment 248689View attachment 248690
Nice grab! If you don't mind me asking, how much did the Corbeaus set you back?
 
Nice grab! If you don't mind me asking, how much did the Corbeaus set you back?
$200 for the pair. the driver is the only one with the rip in the bolster. Passenger is pretty clean. The fading seems to be a little exaggerated in the picture. They are definitely an older set but seem to have rather low usage. They are on Mustang rails, I going to see how far off they are. Hopefully with a little tweaking I can get them to work. Worst case Corbeau sells the G-body rails for $140.
Over all killer price. Super Happy with them. These or Recaro LX are my favorite seats.
 
$200 for the pair. the driver is the only one with the rip in the bolster. Passenger is pretty clean. The fading seems to be a little exaggerated in the picture. They are definitely an older set but seem to have rather low usage. They are on Mustang rails, I going to see how far off they are. Hopefully with a little tweaking I can get them to work. Worst case Corbeau sells the G-body rails for $140.
Over all killer price. Super Happy with them. These or Recaro LX are my favorite seats.
That's a great price, I would've bought them too, and I kind of hoped the fading wasn't as bad in person since it rarely is. I'm in total agreement about seats: Recaro and Corbeau are some of if not my top 2 favorites.
 
  • Like
Reactions: Rktpwrd

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor