Toggle sidebar

What did you do to your G-Body today 2024

Cleaned up the car cause our buddy was getting married and asked us to bring the cars
1731940615164.jpeg

1731940647394.jpeg

Then ended up taking it out yesterday to meet some friends for dinner then got a milkshake
1731942036575.jpeg
1731942048717.jpeg
1731942060454.jpeg
 
  • Like
Reactions: RICKDIZZLE, Ribbedroof, MalibuDavyou5 and 6 others
Replaced header bolts that fell out and self tapped the upper door panel to the door because those plastic clips are bullshit.
 
  • Like
Reactions: MalibuDavyou5
Sanding spot putty used a large plastic spreader spread red spot putty over finders and doors just as befor then i block sanded it all down with 2 blocks of plywood and some 220 sandpaper shot some metal flake on roof of car .if your shooting any flake ? completely cover the whole car except what area your spraying it,...I used a 1.8 nozzle size hvlp gun ( no pic)...im useing 600 or 500 to sand between coats. SHOT SILVER befor the flake...Furthermore when useing the large 1.8 nozzle do not stop your spray passes in the middle unless you have to ( walk) and don't change directions..as the clear( can) will puddle a little at the end of stroke if you don't let off the trigger on large areas (3 to 4 foot up ect) when doing tops shoot a wet ( heavy)coat and by all means hose over the ( your) neck and down the arm ( on top) .it helps to have 2 pine 2x6 (8) " by 6" foot ( cat) walk boards nailed or fixed to something about 6 to 7 inches high on either side of the car ! that helps
 

Attachments

  • 20241117_171409.jpg
    20241117_171409.jpg
    557.1 KB · Views: 15
  • 20241117_171358.jpg
    20241117_171358.jpg
    427.6 KB · Views: 11
  • 20241117_171351.jpg
    20241117_171351.jpg
    508.9 KB · Views: 18
Last edited:
  • Like
Reactions: MalibuDavyou5, Sweet_Johnny and pagrunt
spongbob said:
Sanding spot putty used a large plastic spreader spread red spot putty over finders and doors just as befor yhe block sanded it all down with 2 blocks of plywood and some 220 sandpaper shot some metal flake on roof of car .if your shooting any flack ? completely cover the whole car except what area your spraying it I used a 1.8 novel size hvlp gun ( no pic)... useing 600 or 500 to sand between coats. SHOT SILVER befor the flake..
Click to expand...
That spot putty has some drawbacks but I admit to using it on my hood and will use it in other places as well- it's just so easy to apply and sand. And you're absolutely right about metal flake, that stuff seems to cover everything in the room. I look forward to seeing this in full color.
 
Taller wheel tub progress.....

Relief cut's were made to the driver side tub to allow installation. With that tub now in place, I've been focusing on tweaking the area that got cut to minimize the visual variation vs the pass side tub (a result of the cut). I sent some images to a buddy/hot-rod builder who's been helping w/ideas & suggestions. He has MIG, TIG, & more fab equipment than I do (I only have MIG @ my shop & basics as far as fab work goes). Tentative plan is to possibly move the car to his place next month.
 

Attachments

  • 20241115_180945.jpg
    20241115_180945.jpg
    93.8 KB · Views: 15
  • 20241115_181014.jpg
    20241115_181014.jpg
    88.3 KB · Views: 12
  • Like
Reactions: SS_Malibu, MalibuDavyou5, MrSony and 6 others
scoti said:
Taller wheel tub progress.....

Relief cut's were made to the driver side tub to allow installation. With that tub now in place, I've been focusing on tweaking the area that got cut to minimize the visual variation vs the pass side tub (a result of the cut). I sent some images to a buddy/hot-rod builder who's been helping w/ideas & suggestions. He has MIG, TIG, & more fab equipment than I do (I only have MIG @ my shop & basics as far as fab work goes). Tentative plan is to possibly move the car to his place next month.
Click to expand...

Wow those are wide. Maybe it’s just the angle, or contrast in colors, but they look really really wide. What front wheel and tire combination are you planning on running?
Also, how much taller than stock are the tubs?

Looking good, keep posting pictures of the progress!
 
  • Like
Reactions: scoti and Sweet_Johnny
scoti said:
Taller wheel tub progress.....

Relief cut's were made to the driver side tub to allow installation. With that tub now in place, I've been focusing on tweaking the area that got cut to minimize the visual variation vs the pass side tub (a result of the cut). I sent some images to a buddy/hot-rod builder who's been helping w/ideas & suggestions. He has MIG, TIG, & more fab equipment than I do (I only have MIG @ my shop & basics as far as fab work goes). Tentative plan is to possibly move the car to his place next month.
Click to expand...
That’s nice! Would love to do something like that eventually. I really dislike the stock plastic ones.
 
  • Like
Reactions: scoti and Sweet_Johnny
DSPbuilt said:
That’s nice! Would love to do something like that eventually. I really dislike the stock plastic ones.
Click to expand...
Agreed. How does everyone feel about fiberglass? And would the fenders be smooth or have a factory like appearance? More than once I've pondered making a mold of the originals but just don't have the time or space right now.
 
  • Like
Reactions: Rktpwrd
Sweet_Johnny said:
Agreed. How does everyone feel about fiberglass? And would the fenders be smooth or have a factory like appearance? More than once I've pondered making a mold of the originals but just don't have the time or space right now.
Click to expand...
A smoothed fiberglass option would be real nice! Especially if it's gaining space for the big meats!
 
  • Like
Reactions: MrSony and Sweet_Johnny
You must log in or register to reply here.

Similar threads

Sweet_Johnny
    • Like
    • Wow
  • Sticky
What did you buy for your G-body today? [2024]
Replies
269
Views
22K
General Discussion
86LK
86LK
pagrunt
    • Like
What did you do to your non-G Body project today [2024 edition]
Replies
1K
Views
36K
Non-G Projects
Malibu795
M
johnfastoldguy
    • Like
Bought basket case 1979 turbo sports coupe did everything myself and have a $8000 into it so you youcan to
Replies
3
Views
266
General Discussion
mc1984ss
M
69hurstolds
    • Like
    • Useful
    • Informative
I learned something about fuel hoses today. Did you know....?
Replies
17
Views
1K
Restoration
86LK
86LK

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor

Top Bottom