Honestly don’t recall I wound up doing a bunch of other interior pieces and I think eventually I wound up buying either six or seven cans
CUTLASS Steering Column Paint?
- Thread starter RICKDIZZLE
- Start date
I didn't use a full can whenI recoloerd Jr.'s column this past fall. Put about four coats on it over primer.
1 can should be plenty for the column and I used SEM low gloss clear as a top coat for protection.
I have always used SEM color coat but they don't have a burgundy that matched my interior which is why I bought these instead, but it worked out just fine.
Thank you. I grabbed one can and will compare color to the SEM burgandy that I have. I appreciate the response!
on dash and console i use a scrub brush and spray 9 rinse with water after it is good and dry just before i paint i wipe it down with paint thinner then put a tack coat right away ..the paint thinner softens the plastic a little so the paint sticks better
Similar threads
