Search results

got my 85 307 in my 86 cutlass which had a v 6 in it the computer plugs are different so I been told to swap out the distributor for an H.E.I one . been searching my local salvage yards and parts stores to no avail. anyone have any info on where to find one or what will fit please send info

this damn car getting on my nerves I put a 307 in a V6 car been having one thing after another so now my problem is the plug for the distributor from the car is different from the plug on the distributor. any suggestions on what I should do? one guy suggested using the distributor out of the v6...

my 86 cutlass salon i believe it originally had the v6 /th200 trans before i got it it had a 455 /unknown trans to me. i put in a 307 with th 350 trans my problem is getting the crossmember to line up correctly i have two different ones and they just wont line up to the frame . the bottom one if...

my 86 cutlass salon had a v6 with i believe the th200 i replaced it with a 307 with a th 350 now i cant get the cross member to line up i put it on an angel and can only get one bolt per side to line up is there a different crossmember i need or what?

ok so i finally got the transmission in the car after taking forever to get the correct kick down cable now the freaking cross member doesn't want to fit. I've tried it straight across and it's about 2 inches from the mount so i staggered it and now the bolt holes wont line up one on each side...

got the 307 motor installed in my 86 cutlass now I've been wrestling with the darn headers . finally got the drivers side installed and there is no clearance what so ever the header is about 1/4 inch from the starter and laying against the steering shaft, other than pulling the motor back out i...

i got an 86 cutlass salon i was told it was a 3.8 car. the car had a 455 in that was removed and now i have installed a 307 with 350 trans .my problem is the crossmember which is the original one from the car is about 6 inches rearward from the mount on the transmission. since i didnt remove...

someone removed the original frame mounts to install a big block in my 86 cutlass and i cant figure out how to reinstall them on the passenger side there are holes in the lower control arm on the driver side that enabled me to get a socket in to tighten the bolts down but there are none on the...

got and 86 salon with T Tops just wondering if there was some place i could find the production numbers for this year. the car is light blue with blue inter ior