Search results

Any body got a wiring digram for a delay wipers for an 1987 monte? So What colors they used for what running what on the colum? Or i guess what color in that mess is the feed is really all i need to know. Thanks.

Well i got it fixed today. Put the bulb back in the dash. Still didn't charge. Changed the alternator out with another one and that was the problem. Charges great now. Who would of though it was a bad alternator on a brand new motor. THanks guys for all the great info. :lol:

The front wheels brake line is the rear port and line on the master cylinder if i am correct right?

I put this in another forum with no resonses so try it here. Just bought a hurst roll conrol line lock for my 1987 buick regal. Anybody put these in? I was thinking of mounting in next to the master cylinder and tying into that line down to the dist. block.Anybody got any pics of one installed...

Ok but what is the simple set up then? Can 12 volt keyed ignition power be put to the brown wire to tell the alternator to charge? My other g body is a 1987 monte circle track car that im building. Im wiring the car right now. No dash or factory wiring harness but will be running an alternator...

Well all this makes sense. I pulled the bulb out after i put the new motor in because i went to a auto meter volt gauge. So if i put the bulb back in hopefully it will work. That really seems like a bad ideal if the bulb ever did burn out then the car wouldnt charge. Also for sure it is a...

My alternator is not charging on my 1987 buick regal. I think the dark brown wire is suppose to be hot when the key is on but i have no power there. The red one has 12 volts and i know that is just tied into the hot coming off the starter. I tried tracing it back under the dash but have no clue...

Thanks for the info guys. I couldn't get 3.5 back spacing from jegs or summit. Summit had 10" wheels with a 3.8 inch backspacing. Mounted them up today and fit great. Still plenty of room on the inside frame rail for tire clearance

Thanks guys i put the rusty door on the car. I will just have to patch them a bit. The 87 monte im building is gonna be a circle track ice race car so power windows are not the hot tip for racing as the cars are pretty much gutted. I figured it wouldnt be as easy as unbolting a motor and putting...

I got a set of rusty monte non power doors and a nice set of power window doors. Is it possible to change the guts out inside the door to make it non power crank windows? If so how hard is it? I dont have power windows in the car but the doors i got are in real nice shape.

Thanks

I bought a set of 28-10.5-15 et drag slicks from a guy. He ran them on his 80 regal drag car. Ill be running them on my 87 regal. He didn't know what size rim or back spacing to run. Any body got a clue? I need to order some rims soon. 9 0r 10 inch wheel width? and backspacing? Hope somebody...

Not opposed to the sump in tank but car will mostly be a drag car with limited street use. Car will have a cage anyways and figured with the tank gone that leaves a nice spot to mount the electric pump and filter. I was just at a big car show here last weekend and saw a bunch of guys doing it in...

Ok guys let me pick your brain again for some advise. Installing an fuel cell and electric fuel pump in my regal. Haven't bought anything yet and seeing what you guys use and what works good. What kind of regulator, pump, filter, and fuel cell seem to work the best? What size lines and are you...

Thanks for the help guys. The new nine inch is in. 4.11 gears, detroit locker,35 spline mosers and disc brakes. Looks sweet. Id post some pics if i could figure out how to put them on here. :shock: For the street now im running a set of 275/60/15 rears with drag skinnys in the front on a set...

sorry yes cowl not crowl. my bad

Hey any you guys know where i can get a decent fitting fiberglass 2 or 3.5 inch crowl hood for my 1987 buick regal? I have heard alot of horror stories of them fitting like crap. Just dont want to make that mistake. Any help much appreciated

Looking for a little help. Building my 1987 buick regal and looking for a roll bar. Looked at my track rules and says i dont need a roll cage till im in the 9s with a unaltered full bodied car. Im hoping for best of mid tens. Where can i get a roll bar and any body got any pics of one installed...

Thanks guys. Ya i will be running brodix track one aluminum heads which are angle plug heads. Just dont want to run into a bunch of fitment issuses. I remember ten years back i bought a set of cheap headers for my 1982 cutlass with a small block and what a pain in the but they were. I finally...

Crotchss how do your hooker headers fit on your monte now? Im putting a small block chevy in a 87 regal and looking for a good fitting header. Got a part # for coated ones and a price you paid? Thanks