4l60e

  1. WesFischer05

    HELP Transmission having trouble shifting and low idle

    I just finished an LS Swap into my 1981 El Camino. I have a lot to say so I will hopefully cover all the bases. It has an engine from a 2001 Yukon (5.3) that is completely stock internals and stock rebuilt 4l60e. I have a Holley mid mount kit along with a LS6 intake manifold and a few other...
  2. CaliWagon83

    Column vs. Transmission Rooster Comb

    Trolling eBay for G-Body parts (my new unofficial hobby) I've found a lot of steering columns with column shifters for G-Bodies. None of them specified whether they were for the 3-speed or 4-speed transmissions. Seems the main difference is in the "rooster comb" in the transmission itself. Is...
  3. CaliWagon83

    Parts needed when going from 3 to 4-speed, TH200 to 4L65

    Hi all. Just wondering what parts I should be on the lookout for going from a 3-speed column-shift to a 4-speed. Do I need a new "rooster comb"? Also, I currently have an analog needle shift display. Ultimately, I plan on going to an aftermarket 6-gauge cluster that eliminates that. Will I need...
  4. The1Heisenberg

    4L60e won't shift out of 1st gear

    Hey guys I know I haven't posted at all since I joined but I can't work on my car when I'm at school. Either way, I've been trying to solve a no-shift problem with my LT1 swapped Cutlass, not your typical G-Body issue but here goes. Background on car: 1986 Olds Cutlass Supreme w/ 1996 Caprice...
  5. R

    1985 Buick Regal 3.8l 4 barrel transmission compatibles

    hello, new here....bought a 85' Buick Regal 3.8 4 barrel. Get the car up and running only to find out it has a bad trans. If you put the car in drive the trans starts to chatter and bang when it shifts. If you put in 1st and change the gears manually it'll act fine. Not sure what's going on with...
  6. Boy1duh

    Speedo & tps sensor advice

    I need help I did a horrible job at researching this swap evertime I turn around I gotta buy something because I'm too far in on a piss poor set up to turn around now anyway...I got a 5.3 with 4l60e it's s carb set up I bought a transmission controller now I see I need a tps sensor and my...

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor

Top Bottom