1982 Monte E85 Blow Thru Procharged SBC Build *PICS and VIDS ADDED***RUNNING***

[motorheadmike]

Got to the track. Off the jackstands, largest pulley I have, low timing. 3500 rpm off the trans brake.

View attachment 175002

I think the Mustang forgot it was racing.

 

[64nailhead]

Holy sh*t - 1.30 60’ 1st pass. Nice job!!!!

 

[wingnutks]

Holy sh*t - 1.30 60’ 1st pass. Nice job!!!!

Lol thanks. On a radial too.

 

[64nailhead]

Lol thanks. On a radial too.

Was this yesterday (track rental)?

And you're giving some motivation to get my 60' into something reasonable.

How much boost on the hit? And have you weighed this?

 

[wingnutks]

Was this yesterday (track rental)?

And you're giving some motivation to get my 60' into something reasonable.

How much boost on the hit? And have you weighed this?

The scale was broken so I am not sure. I had it on the 2 step at 3500rpm about 3psi. It'll pick up a bit when I get better front shocks and strap the front down a bit.

 

[64nailhead]

The scale was broken so I am not sure. I had it on the 2 step at 3500rpm about 3psi. It'll pick up a bit when I get better front shocks and strap the front down a bit.

Wow, that's some steam at only 3 psi.

 

[wingnutks]

Also, last time I took this car to the track it ran the same mph in the 1/4 miles as it does now in the 1/8 lol

 

[wingnutks]

Wow, that's some steam at only 3 psi.

Well converter flashes right to 5800 and makes like 7-8psi

 

[64nailhead]

That looks like you have quite bit of room to go faster as well. Why did the RPM's drop from 5800? It looks like you have a 4 speed.

 

[wingnutks]

That looks like you have quite bit of room to go faster as well. Why did the RPM's drop from 5800? It looks like you have a 4 speed.

Nope, converter grabbing. It's a bit tight cause I had it made for the 3.70" pulley and I was on the 4.75" pulley