83 Hurst/Olds Engine Swap 307 with 5.3 LS4.

[Apexweights]

Thank you so much. Jacob is this what i need to mount the engine to the trans http://m.summitracing.com/parts/tfs-30675700​

 

[jacobdavis1979]

You can but you will need the flat 6.0 flywheel and its not included with that kit.
The 5.3 is dished. Il try and link the kit i used.
http://www.summitracing.com/parts/a...TmTCKfEdd652QUSbkQJgjCAYjeVuFFaoeURoCMQXw_wcB

 

[87National]

no, the spacer and bolts he linked to are designed to work with the 5.3 flexplate.

 

[jacobdavis1979]

no, the spacer and bolts he linked to are designed to work with the 5.3 flexplate.

I noticed that when I woke up this morning I misspoke.

 

[jacobdavis1979]

If you're gonna buy the kit without the flywheel and egg out the holes your self just use this and save some money. This came with my kit and just hammers into the back of the crank.
http://www.jegs.com/i/Hughes+Perfor...gm7R4P65fPVxGoOOZfLoZZmGdWEe3aWS8AaApbZ8P8HAQ

 

[Apexweights]

Long story short I bought my 83 hurst/olds from a guy who bought it from another guy, and the lightning shifters are not in the car anymore. Well thankfully I have the lightning shifters from my dads old and shitty 83 hurst/olds. Could someone tell me the correct part number for the shifter cable that runs from the shifter to the transmission to allow me to be able to use my lightning shifters?

 

[Apexweights]

Long story short I bought my 83 hurst/olds from a guy who bought it from another guy, and the lightning shifters are not in the car anymore. Well thankfully I have the lightning shifters from my dads old and shitty 83 hurst/olds. Could someone tell me the correct part number for the shifter cable that runs from the shifter to the transmission to allow me to be able to use my lightning shifters?

 

[Apexweights]

Hey guys, I am going to be putting a new cam into my lm7 engine part# K54-414-11, Basic Operating RPM Range:1,300-6,300, Intake Duration at 050 inch Lift:216, Exhaust Duration at 050 inch Lift:220, Duration at 050 inch Lift:216 int./220 exh., Advertised Intake Duration:269, Advertised Exhaust Duration:273, Advertised Duration:269 int./273 exh. My car came with a stall converter of 2400 rpm. I was thinking about staying with the converter that is already in the car.