84 Cutlass street car

[melloelky]

what's worse than a bad welder?a bad grinder.

 

[39F]

 

[39F]

 

[melloelky]

That's an edelbrock(now Qa1)no hop bar welded to the housing.

 

[39F]

It's a joke is what it is

 

[39F]

Well some small updates, the car is 30 mind from me at a buddy's place so i don't get to work on it as much as I want to but got frame cleaned, cut off at steering box, bunch of dumb cut out of the shell, and new front half of the cage bent up and fit, tacked in place, also got my buddy's 9" done for his Monte ss ,shooting for 2900-3000 lbs race ready should be a fun street car 🙏,

 

[39F]

Nothing exciting really got engine bay bars in and rest welded up. Have to hold off on putting bars in going down to frame off the engine bars due to unsure were my headers will land. Going racing Sunday so that will probably be last time regal gets raced.

 

[39F]

Nothing really special got seat mounted ,patched fire wall up were roll cage comes through little bit of duraglass will smooth things up, friend of mine gave me a 22 gal Jazz fuel cell brand new didn't fit his stock car. Also welded the tabs holding the body to the frame back on . Thing that sucks about a big project you got so much to do you get lost in what to do next.

 

[bracketchev1221]

Your going to want to run a diagonal bar from the frame in front of the firewall to the strut bar.

 

[39F]

I'm on hold with that cause I need to put headers on first I planned on it tho