87 El Camino Daily Driver/Weekend Cruiser

Status
Not open for further replies.
youngdeezy said:
you said 4's my boy i didnt think you would go that big but its shows only haha. are they rocs or something else?
o yea dezzy he said 4s.. warren got some tricks up his sleave for them "haters" out there...... keep it @ that!! :wink:
 
kuruption109 said:
youngdeezy said:
naw man im part of the crew i need to see them exclusive updates before they drop on the net.....text messages work :wink:
ofcourse u will be informed...


man your line just made me think of this :rofl: alright my bad elco Warren but i had to do it. ok back on track now
[youtube]NtILxBszyf8[/youtube]
 
youngdeezy said:
kuruption109 said:
youngdeezy said:
naw man im part of the crew i need to see them exclusive updates before they drop on the net.....text messages work :wink:
ofcourse u will be informed...


man your line just made me think of this :rofl: alright my bad elco Warren but i had to do it. ok back on track now
[youtube]NtILxBszyf8[/youtube]
lol thanks for the throwback
 
Bumpin1ohmSS said:
Got it all back together. No leaks so far from the bags or the rear diff cover. I used the Felpro and some Ultra black to seal it up. . Test drove and everything seems cool. The rear is higher but thats cool. Will work out for me when I drop the 4's on for shows only tho.

5636318424_fa09834a5c_b.jpg


5635737863_441e67f6b5_b.jpg


Time for work already! Dang time fly's

Elco Warren 8)
80zBabiezCC


When you get a chance can you check out my pics I have posted off my rear springs that I am having a problem with. After looking at your picture I am thinking that my springs may be installed wrong. In my picture the tight coils are to the top and in your the tighter wound coils are to the bottom. Also what setup do you use to control the rear bags? I am thinking of running the same setup. Thanks
 
Yo ElCo Warren, do you stay in the LA area of Cali and take this to the Pomona Car Show/ Swap Meet this past Sunday??
i coulda sworn i seen this car and if it wasnt, i saw it witth the same color scheme. Sweeet ride,.
 
I was trippin and posted this in Mels thread. LOL! That damn snow vid had me gone!

Thanks fellas!! Deezy! If you dont take that gay *ss Snow off my page, We gonna have probs! HAHAHA! I couldnt stand that dude and Mc Shan(hip hop before yalls time) for bringin him out!. LOL! Man ive been on the dl for the past few days. Gettin my home gym together and just goin over all the car projects I want to complete. My instructions shows the tight coils on bottom and the wider coils up topNaw bruh..I wasnt at the Pomona swap meet. I missed out. I was supposed to be moving some of my weights and stuff that day. But my help backed out. Got a young cat thats gonna weld everything up for me at work. He's really into building custom rides and has a clean *ss truck body dropped and all bagged out. He told me to just leave the parts and he's hook it up.

Im sposed' to be goin to AZ this weekend to help fambam out. We shall see. I took Fri off for a 3 day weekend so I could install the digi gauges on the El. But then the fam emergency popped up. We shall see. Cars ridin nice. I still need to get the wheels aligned like right now!! Ive worn the fron tires out badly. Me being lazy...Im on it tho.. I took the spare tire project back to work and did some trimming on the small gussets (sp?). Gottem how I want. Imma take the bedliner mat out and drop my boy Twins 24" wheel/tire in thee and mock up where I want it to sit and where to drill the holes for the base plate...

Elco Warren 8)

80zBabiezCC
 
Ok..Hope to have the pieces welded up this week for the spare mount. Man I swear nothin is easy for me. LOL! I wanted to cut the end off the rear axle on my blown out 7.5. So I spin it around, remove the bolt on top of the posi and then try to push out the center pin where the spider gears are. Man its frozen. So I use some industrial strength "Kroil" and let it sit. Loosens it up , but I had to wrap on it cuz it frozen in there. Knocked it one way, spin the axle and knock it the other. Well I turned it and tapped it into the pumkin and in got stuck. Damn! Now I cant spin it around. LOL! Its cutoff wheel time!! Hope to have some updated pics soon. i kinda fell off on the ol girl but some news of a show in AZ has lit a fire up unda dat azz! HAHA! 80zBabiez STAND UP!!! :wink:

Elco Warren 8)

80zBabiezCC
 
Bumpin1ohmSS said:
Ok..Hope to have the pieces welded up this week for the spare mount. Man I swear nothin is easy for me. LOL! I wanted to cut the end off the rear axle on my blown out 7.5. So I spin it around, remove the bolt on top of the posi and then try to push out the center pin where the spider gears are. Man its frozen. So I use some industrial strength "Kroil" and let it sit. Loosens it up , but I had to wrap on it cuz it frozen in there. Knocked it one way, spin the axle and knock it the other. Well I turned it and tapped it into the pumkin and in got stuck. Damn! Now I cant spin it around. LOL! Its cutoff wheel time!! Hope to have some updated pics soon. i kinda fell off on the ol girl but some news of a show in AZ has lit a fire up unda dat azz! HAHA! 80zBabiez STAND UP!!! :wink:

Elco Warren 8)

80zBabiezCC
KURUPTION AKA 4 SPEED DAT HOE AKA HEAD HUNTA!! CHECKIN IN...80ZBABIEZ CC
 
Status
Not open for further replies.

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact Admin@GBodyForum.com for info on becoming a sponsor