94 Blazer 2dr 5.3 Twin Turbo (Tyclone)

[fleming442]

Can you dye lighter? I've only ever gone black.

 

[motorheadmike]

I've only ever gone black.

I hear you never go back. But, since you started there... I'd say you are stuck.

 

[mclellan83]

I hear you never go back. But, since you started there... I'd say you are stuck.

I am gonna try calling the carpet place again, they said "Typically when we don’t produce something, it’s because of original hardware or material that we do not work with" and that if I would like I can buy more fabric by the yard to make something myself. Other option is my seat guy has some extra seat material that I may end up using if I don't use it all on the dash

 

[mclellan83]

Did some work on the Blazer Saturday, never get as far as I want but still progress. Got to do some digging to see why the lights I am trying to use on the Blazer for under the dash will only flash for a second when I connect it to the battery, they work just fine on the Monte and is the exact same setup 🤷‍♂️

https://imgur.com/a/JQKycr6

 

[mclellan83]

Spent Saturday and Sunday at the shop but feel like it paid off, got a bunch of little stuff done. Was able to get the hatch drilled and installed into the dash piece, wired up all the under dash/side window lights for when I open the doors, and put the seats back together after getting the huge Blazer shrunk down. The major payoff was getting the motor to fire up, downfall is the gauges aren't working and not seeing any oil coming off the lifters....

https://imgur.com/a/3fKJySX

 

[mclellan83]

Been slacking on this as of late, been too busy going to car shows and driving around with buddies. Hope to get a good bit of work in on it Sunday since my buddy with all the skill will be coming down. I did come in last Friday when I was off to mess with it some, doesn't seem like much progress but got all the holes into the carpet and redid the rear cover for where the seat folds in the back

 

[64nailhead]

Did you do those seats yourself or hire them done?

 

[mclellan83]

Did you do those seats yourself or hire them done?

Got the guy that does seats for the bike shop, I thought he was really reasonable for them. I liked that way much better than when I got the covers done on the Monte, going to be going a different route on the Monte cause I hate how little bolstering there is with them

 

[mclellan83]

Came down on Saturday and messed with some wiring, while I was down there my buddy messaged me his appointment got bumped from that day to the next so we wouldn't be working on it. On my way home I realized I didn't wire up all 3 ground together only did 2 so gonna have to redo that

 

[motorheadmike]

I have that same Disney Princess blanket.