94 Blazer 2dr 5.3 Twin Turbo (Tyclone)

[mclellan83]

Since Mike was a bad influence and talked me into boring you with my junk, and the fact that I like to show off my junk I figured I will try to back date this to show you some of the steps of it going together. But here is how I got her with because of it being sent from Florida to here
Loaded onto the sellers trailer to meet the big trailer

Loaded onto carrier

Then once I got it here

 

[mclellan83]

First order of business was to get a motor for it

motor mounts for it

Then some of the other necessities to me; the bigger front brakes, digital dash, and clear lenses

 

[mclellan83]

Then I decided to tackle what all the lighting would go LED

 

[mclellan83]

Modifications for the lights to fit

 

[mclellan83]

The lights in action

https://imgur.com/a/cH2bowv

https://imgur.com/a/lnfjpap

https://imgur.com/a/JcTjlEf

https://imgur.com/a/VLQgS00

 

[mclellan83]

Then decided to tackle some of the interior stuff to get sent off to mimic the Syclone seats and use some of the plaid on interior pieces like I did with the Monte. Had originally wanted to use the same material but could not get a hold of enough to do it so had to decide between 2 pieces

Seats are going to mimic this look but with a dark charcoal velour with teal piping

 

[mclellan83]

Then had to take measurements all around for the forged wheels to get made which I believe is going to hold us up from being done sooner, had thought when I got the kit from Sportmachines it would just bolt up. But you have to cut the spindle which means we have to wait to get the wheels since it has to be mobile to move around the shop before I can get the front calipers test fit before getting them powdered

 

[mclellan83]

Then finally getting the motor ready to go in the weekend before last

 

[mclellan83]

Then stabbing her in this past weekend and stealing the head unit from the Monte to go in here

 

[mclellan83]

Now we are up to date; ordered an adjustable fuel regulator with return, a couple of plugs for the turbo drains, adapters for the harness to connect to the injectors, and fuel adapter fitting which will hopefully be in by the end of the week. Gonna have a lot of work to get the interior done as well in the mean time of waiting probably 2 months for the wheels to be done