AC brackets froze?

Status
Not open for further replies.

Landon Collins

Not-quite-so-new-guy
Feb 4, 2018
10
23
3
Rogersville
Been trying to put a new water pump on my 82 Malibu wagon(305, AC/ powersteering), but I cannot get the AC Compressor to budge on its adjustment rails to remove the belt. Im unsure if the power steering pump below it needs to move first but its very hard to tell as there doesnt feel to be any give in the compressor. I have both locking bolts unscrewed and checked that the bracket faces havent simply rusted to the compressor itself. Im pondering if the power steering pump needs to be loosened first in order to let it swing up, and thus let the compressor swing down a bit to make enough room.

Am I missing something here folks? IM working in the dark almost literally so perhaps Ive overlooked a bolt I need to wrench loose first.
 

Ribbedroof

Comic Book Super Hero
Supporting Member
Jan 4, 2009
4,911
7,029
113
Wellston, OK
Loosen the pivot bolt?

A6 or R4 compressor? Original would have been R4

SAM_1750.JPG
SAM_1751.JPG
 
Last edited:
  • Informative
  • Like
Reactions: 2 users

TURNA

Rocket Powered Basset Hound
Jul 24, 2009
10,941
19,992
113
Socialist NY
Try a bigger wrench!!

big-wrench3-1024x506.jpg
 
  • Useful
Reactions: 1 user

TURNA

Rocket Powered Basset Hound
Jul 24, 2009
10,941
19,992
113
Socialist NY
R12???? 4 bolts on the top and off

I should say 4 on the front 4 on the back....

U have a serpentine system??
 

Landon Collins

Not-quite-so-new-guy
Feb 4, 2018
10
23
3
Rogersville
R12???? 4 bolts on the top and off

I should say 4 on the front 4 on the back....

U have a serpentine system??
It’s an NOS R12 compressor, but the system has 134a fittings on it so I assume it’s just had the heads swapped out on the fill/drain ports. I’ll have a look for these other bolts tonight.
 

Ribbedroof

Comic Book Super Hero
Supporting Member
Jan 4, 2009
4,911
7,029
113
Wellston, OK
R12 is a refrigerant

R4 is a rotary 4 cylinder compressor....the short one.

A6 is an axial 6 cylinder compressor.....the long one
 
  • Informative
  • Agree
Reactions: 1 users

Longroof79

Rocket Powered Basset Hound
Oct 14, 2008
12,168
9,778
113
Gainesville, Fl
It’s an NOS R12 compressor, but the system has 134a fittings on it so I assume it’s just had the heads swapped out on the fill/drain ports. I’ll have a look for these other bolts tonight.
It still doesn't describe what compressor you're using. Your year would have the shorter R4 rotary compressor. Earlier cars, like mine, would have the A6 axial type compressor. They both used R12 refrigerant originally.
I think Brian pretty much described both types.^^^
 

TURNA

Rocket Powered Basset Hound
Jul 24, 2009
10,941
19,992
113
Socialist NY
this

compressing-air-on-board-compressor-harrison-r4-compressor



or this

s-l1000.jpg
 
  • Like
Reactions: 1 user

Ribbedroof

Comic Book Super Hero
Supporting Member
Jan 4, 2009
4,911
7,029
113
Wellston, OK
Compressor usage was dependent on year AND engine, both types were used in the same years.

But, for a factory installed 305 in 1982, it would have been an R4
 
  • Like
Reactions: 1 user
Status
Not open for further replies.

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor