An transmission lines

[jeremyandthemonte]

hey every I have a th350 in my car and in need of some an stainless line to route away from my headers . Anyone know of a kit on the fitting size?

 

[CWPottenger]

I used -6AN on mine.

 

[565bbchevy]

So you are referring to steel braided line when you say AN stainless? If so I made my own using 8 AN and I doubt there would be any kits since there are too many variables on routing.

 

[jeremyandthemonte]

Any one direct me a link to cross reference size from a brake fitting to a an line

 

[CWPottenger]

Here is a chart: http://autoperformanceengineering.com/html/AN_Thread_Sizes.html

 

[mikester]

Just make sure you get the right fitting to go into the transmission. Its not a regular NPT AN fitting. Its
NPS and comes with a small gasket or seal. If you use the wrong one you can crack the case.

http://www.summitracing.com/parts/rus-640520

 

[pontiacgp]

Any one direct me a link to cross reference size from a brake fitting to a an line

Marken should have what you need

 

[jeremyandthemonte]

Marken should have what you need

I am going tomorrow with my fitting to get some thanks guys