i am working on an engine to temporary replacethe Big Block in my monte the Big block runs fine but it needs some up grads new aluminum heads and a look over that will take a few years and due to it being 10.25:1 compreshion i dont want to damage it running it with iron heads.
so i traded a good but apart olds 455 that needed an over bore and work. For a good fresh bore .030 over 350. i am shootinf doe 9.0~9.5:1 compression. the pistons are .040 in the hole so i am having the block decked .020 and ill use a .015 steel shim heads gasket. i am sooting for 87 octane gas.
the 350 has:
Keith Black/KB Pistons 1436-030 - Silv-O-Lite Cast Pistons
http://www.summitracing.com/parts/UEM-1436-030/
new crank from Autozone
new Speed Pro Rings
looking at: and the only thing i need to get it running
Edelbrock performer frends has for $40
cam shaft Melling MTC-1 204/214 @ .050 .420/433 lift with lifters i can get for $90 at work
As for heads idk i am looking for a set on cregslist but they need to be 76cc for 9:1 or 72cc for 9.5:1 and if i am getting stock heads they better bolt on i dont want to put work in to them. but if there aftermarket i don't mind spending the money.
I seen this on E-bay i can get the hard ware for them for about $130.00
http://www.ebay.com/itm/Dart-New-Pair-B ... cd&vxp=mtr
so i traded a good but apart olds 455 that needed an over bore and work. For a good fresh bore .030 over 350. i am shootinf doe 9.0~9.5:1 compression. the pistons are .040 in the hole so i am having the block decked .020 and ill use a .015 steel shim heads gasket. i am sooting for 87 octane gas.
the 350 has:
Keith Black/KB Pistons 1436-030 - Silv-O-Lite Cast Pistons
http://www.summitracing.com/parts/UEM-1436-030/
new crank from Autozone
new Speed Pro Rings
looking at: and the only thing i need to get it running
Edelbrock performer frends has for $40
cam shaft Melling MTC-1 204/214 @ .050 .420/433 lift with lifters i can get for $90 at work
As for heads idk i am looking for a set on cregslist but they need to be 76cc for 9:1 or 72cc for 9.5:1 and if i am getting stock heads they better bolt on i dont want to put work in to them. but if there aftermarket i don't mind spending the money.
I seen this on E-bay i can get the hard ware for them for about $130.00
http://www.ebay.com/itm/Dart-New-Pair-B ... cd&vxp=mtr