Does this look bent to you?

[L92 OLDS]

How would I straighten the frame?

I had a really nice 1983 Cutlass Supreme and both sides of the frame were bent up from the previous owner jacking the car up incorrectly.
I used the big Harbor Frieght slide hammer to fix it. It worked great. The kit pictured below does not have the hooks you would need. Must be a newer version? Not sure

 

[Texas82GP]

I had a really nice 1983 Cutlass Supreme and both sides of the frame were bent up from the previous owner jacking the car up incorrectly.
I used the big Harbor Frieght slide hammer to fix it. It worked great. The kit pictured below does not have the hooks you would need. Must be a newer version? Not sure

View attachment 178415

The car must have been on a lift?

 

[Supercharged111]

I have a better question: where's the rust?

 

[fly_25]

I have a better question: where's the rust?

You mean THIS rust? I guess I just got lucky with the frame.

 

[fly_25]

Did the best I could with the giant crescent wrench to straighten the frame out, not perfect but a little better. I'm satisfied with it. Thanks for all the ideas!

 

[Supercharged111]

You mean THIS rust? I guess I just got lucky with the frame.

Oh damn, that's so weird the frame is so clean, unless there was cladding right there?

 

[Rodney Pickering]

Looks like part of mount has been left out. Here’s what a 81 Malibu frame looks with 1987 Monte SS cross member bracket add for 200r4 trans from the same Monte donor car
Look at second photo

 

[Supercharged111]

Looks like part of mount has been left out. Here’s what a 81 Malibu frame looks with 1987 Monte SS cross member bracket add for 200r4 trans from the same Monte donor car
Look at second photo

Feel free to deliver that to Colorado Springs.