Doors

[90hurst/oldsguy]

the striker is to far in move it out a little so you get the 2 clicks you need to have both clicks .i know it confuses people

Ok I'll definitely give that a try

 

[jcelk]

btw the striker has to line up with the latch' look in there with a light and the door almost closed the striker goes up and down too

 

[90hurst/oldsguy]

btw the striker has to line up with the latch' look in there with a light and the door almost closed the striker goes up and down too

I did that this morning and I can definitely see a gap and the washer for the striker

 

[jcelk]

you need to clarify gap don't know what you mean

 

[90hurst/oldsguy]

you need to clarify gap don't know what you mean

I was talking about the gap at back end of the door .

 

[jcelk]

let me know how things look after you move the striker out and make sure the striker lines up center with the door latch. when closing. also you can try to pick up the very rear of the door to see how much wear is in the door bushings