Electric fuel pump

[jacobdavis1979]

if your not goin fuel injected i wouldnt worry about it lol
But i think summit has an intank pump/sending unit for camaros around that year that might work im not sure but if it did then you pipe a regulator like cruical and jae said

 

[gearhedjon]

Thought I would put my 2 cents in. I am currentally running a fuel injection pump in a GN tank for a carb in my 81 Cutlass. I am using a GN tank, this will need to be slightly modified to fit. Simply, you just need to give the neck a slight bend down to be used in a Cutlass. I then used a Monte Carlo 4.3 TBI pump. This pump runs a pressure of 9-14 pounds. Use a 3/8TH line to the carb, add a T before the carb and run a 1/4" fuel line on the drivers side where the V6 line would go. This makes a simple loop system and allows the carb to use as much fuel as it needs at full throttle. The sending unit works the same. You will need to run a power wire from the fuse box to a switched source. Works great, better fuel pressure, no vapor lock and quick start up. John

 

[onebadasscutlass]

Thanks guys you all have Been a lot of help

 

[GT_80]

My 81 had a carbureted v-6 originally and it came with return lines.