For Those Not Familiar With The Steering Shaft Upgrade

[kingcolbert83]

Here is a straight forward video. Top priority on my list to do when i get some more money. I know its been posted before but not sure if anybody posted link to video. Albeit its really not needed but never hurts.

http://www.tuneyfish.com/video_player.php?vid=220

 

[jonnyslick]

Awesome ... What Year/Model of Jeep is that shaft off of?

 

[kingcolbert83]

Awesome ... What Year/Model of Jeep is that shaft off of?

93 through 98 jeep grand cherokee. I'm probably going with somewhere in between if I can. I couldn't find the price on autozone site for a new one but I seen other adds for 100-200. Most people that have them have use ones from what I was reading on the oldsmobile site.

 

[85GPLef41]

They call for a 93-98 Grand Cherokee shaft but... There are two different kinds both fit the gear box but one only fits the steering shaft.
i bought the wrong one first then i had to go get the other one. The difference is that one has a aluminum coupler and the other is steel. Get the steel one as it has a bigger opening for the steering shaft than the aluminum one. It fit a little tight but with some persuasion it fits good.BTW Regular Cherokees have the same shaft as long as its the steel coupler . I will try later to post pics of the wrong shaft.
here are some poor quality pics lol!!
http://s387.photobucket.com/albums/oo31 ... 91303a.jpg
http://s387.photobucket.com/albums/oo31 ... 091302.jpg
P.S. make sure it isn't bent and that it collapses still. best part it only cost 7 bucks at the pick and pull .

 

[Lue]

here is also another thread around that topic

http://gbodyforum.com/viewtopic.php?p=6 ... ght=#66938

 

[pontiacgp]

That was awesome and thanks..... 😀

 

[attngtr]

Is it just the grand cherokee steel shaft that fits? Is there such a thing as just a cherokee. I found one but they say it is from a 98 cherokee. Will it fit?
Thanks

 

[85GPLef41]

I pulled mine from a 91 cherokee. As long as the coupler that connects to the steering wheel shaft is the bigger end and made of steel. I found that there is two different ends, but i have seen that both models seem to use that shaft but some Grand cherokees use the smaller one made of aluminum. I am at work but i will try to post a pic later of the wrong shaft.

 

[85GPLef41]

Here is the pic of the wrong steering shaft end..
http://s387.photobucket.com/albums/oo31 ... 91303b.jpg
Hope this helps some as you can tell the ends are different.

 

[kingcolbert83]

Thanks