Guess my 1/4 mile time!!

[565bbchevy]

This would be more fun if you already knew what you time was and we would see who could come closest to guessing your actual time
Kind of like the show Past Time.

 

[Ryebonti123]

Was it dynoed or 450-500 is just what the guys told you?
Those heads would need lots of work for those numbers.
Cam specs???
A 500hp small block is going to need more than a 2300 stall torque converter.
If you have 475hp and everything was perfect it would go bottom 11’s @120
I’m thinking you might go low 13’s...high 12’s if you’re lucky.
Not trying to be an *ss...been there, done that.

I was just told about the hp no dyno...No idea on the cam specs. I agree with a higher stall... ill see if i have the time/money to change it out. What rpm would be ideal? I know, i know, no cam specs.... 🙂

 

[Ryebonti123]

This would be more fun if you already knew what you time was and we would see who could come closest to guessing your actual time
Kind of like the show Past Time.

Lol, ill start a new thread after the track!

 

[lilbowtie]

Kinda turning into a crap shoot - do you know what size valves are in the heads?? any work done on them ?? compression ratio ?? Looks as if you removed the air in one pic - how are you mounting the accesories with those old heads. What ever happens hope you have a fun day and turn a great time.

 

[bracketchev1221]

The converter will most likely be too tight, maybe even not enough gear. But you'll have to try it and see. Like was said, a good setup can go fast with low hp. So its hard to guess. Hope for low 13's maybe even high 12's. Me and my friend ran a Camaro, with a Merkel built 355 and it made if I remember, 435 on the dyno and it went 11.58 in a stock type Camaro. With 9X28 slicks, an ATI 4400 converter and open headers.