Headlight harness for higher wattage H4 bulbs

[thrasher]

There are two types: dual 87 terminals are just dual outputs once 86 is triggered.

That's what I need two of.

You still need 2 relays for each low and high beam.

4 Relays, maybe I'm reading that wrong.
I think I only need two.

One relay to run low beam on left and right headlight.
One relay to run high beam on left and right headlight.

Not my car but this is the system I'm working with.

 

[thrasher]

Received that 15 dollar harness today.
I had read on a site that the wire used in this harness is 12 awg. That info is totally wrong.
I clipped the ends off of one of the main power and grounds and found only 16 awg. The package says up to 100 watts... meh, no thanks.
If they're advertising 100 watts then I would think the wire would be at least 14 awg but nope.

I might put it in as is till I can get all the good stuff to build a harness from scratch.
Obviously I won't be running my 100w bulbs with it.