intake question

[85cutlass85]

will this intake work on a 307 with 5a heads? will eveverything bolt right up?

http://www.summitracing.com/parts/EDL-2812/

 

[FE3X CLONE]

That intake is WAY TOO much intake for a stock 307 or even a modified one. It definitely won't fit under your hood.

 

[outsider_27]

^ x2 I wouldn't even use that on my 350.

 

[joe_padavano]

Uh, did you even look at the suggested operating range for that intake? When was the last time you had your 307 over 5000 RPM?

 

[79cuttycholo]

if u want a good intake geta edelbrock performer rpm manifold dnt even waist time on the edelbrock performer manifold isnt worth it its basically a stock replacement

 

[bigdan]

x2 for the rpm performer a good all around intake ....and suitable for 350 also!