Lowrider rebuild

Status
Not open for further replies.

JuuCeD82ReGaL

Greasemonkey
Jan 27, 2008
110
0
0
42
Marietta Ga
Ok its been forever since I last been on here but I did a few things since then,, my car is 100% recession built and im proud of all the work I put into it and also thanks to my car club family Latin Low C.C. Marietta Ga

how it looked at first
HELP.jpg

Some body work,, i removed the vinyl top
bodywork002.jpg

scrape scrape!
bodywork003.jpg

bodywork008.jpg

bodywork008.jpg

bodywork006.jpg

bodywork009.jpg

bodywork007.jpg

All done for now
regal006.jpg

regal002.jpg



Shot the car with a 30.00 can on rustoleum from home depot dosnt look bad at all but next I will try that tractor paint until im ready for a spendy paint job

:lol:
 
JuuCeD82ReGaL said:
Shot the car with a 30.00 can on rustoleum from home depot dosnt look bad at all but next I will try that tractor paint until im ready for a spendy paint job

:lol:

Hey, whatever works. Looks like a good start, keep up the good work!
 
Nice
cheesy.gif
. What are you running in the trunk?
 
I am running now2 pump setup 6 batts at 72 volts, 12inch strokes for the rear and 8's up front 4 switches at the dash and reinforced and extended upper a arms 1inch.
 
Re: Lowrider rebuild w/ custom paint job

:wtf: :rofl: Its beena whole year and havnt posted since but thought heck might as well show ya'll what I have done to the car since. First I left that car club and by doing that gave me motivation to do things on my own. I still live in a apartment so I had to rent a storage to do my work in. I re stripped my car down march 2010 and began the body work once again. This time were going BLACK :shock: First time body man and painter I was determined to get it done and RIGHT! by my expectations. For the top I used a quart of retro hiphop red along with house of colors red metal flake intercoated with the clear and the bottom black clearcoated. I colorsanded the black with 2k grit and the red with 400grit cause of the flake and 4 coats of clear built up.I spent maybe 650.00 total including the compressor I had to go buy :roll:
regal2010010.jpg

regal2010006.jpg

regal2010009.jpg

regal2010008.jpg

newpaint001.jpg

newpaint002.jpg

newpaint004.jpg

newpaint005.jpg

newpaint009.jpg

newpaint008.jpg

newpaint011.jpg

newpaint015.jpg

newpaint016.jpg

wflake001.jpg
 
wflake006.jpg

wflake010.jpg

wflake012.jpg

wflake013.jpg

wflake014.jpg

wflake016.jpg

wflake017.jpg

wflake019.jpg

regaldone001.jpg

regaldone004.jpg

regaldone003.jpg

Up next is motor change,, I blew the piston rings the first time having the car back out. Low power,, ton of blow by and smoke like crazy along with overheating issues. I just bought a chevy 88 4.3 v6 with edelbrock intake and holley carb in really good shape. Hope it works. Will post that build in another thread. thanks for looking
 
Looks like its coming along good. Sucks about the engine, but it sounds like you are not letting it slow you down. Once you get it on the road maybe you can meet up with a few of us from Cartersville. Here is a pic a from last weekend at Dellinger park in Cartersville.






DSC_0029.jpg
 
Thanks bro,, I actually live 15min from cartersville, im on roswell rd off 120 loop. I got another homie who lives in cartersville also with a regal thats lifted. Im on layitlow also I see you on there. HITINSWCHZONBICHS 8)
 
JuuCeD82ReGaL said:
Thanks bro,, I actually live 15min from cartersville, im on roswell rd off 120 loop. I got another homie who lives in cartersville also with a regal thats lifted. Im on layitlow also I see you on there. HITINSWCHZONBICHS 8)


Coo, I seen that screen name before. You talking about Samuel? If so thats his regal on the end in the pic. I know he got it painted not too long ago.
 
Status
Not open for further replies.

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor