More body issues

[Montecarlo79]

The best seam sealer is two part, 2k epoxy sealer. It's best to paint the area with 2 part epoxy primer, then seal with epoxy seam sealer, then recoat with more epoxy primer, then topcoat with 2 part urethane.

Wouldn’t it make it harder to take apart in the future if I did that?

 

[Clone TIE Pilot]

Wouldn’t it make it harder to take apart in the future if I did that?

It's the correct way to seal a seam. 2 part auto body supplies are much more durable than 1 part stuff. If it's easy to take apart, then it can fail easier. The good stuff isn't cheap.

 

[08Malibu]

View attachment 255301More bondo found at both driver and passenger corner, not a shocker, should I put more on?

Looks like factory seam sealer to me.