motor mounts

[SUBLIME80BU]

Can some please give the torque specs for the mount to frame, mount to block, and the through bolt. thank you.

 

[565bbchevy]

I have always torque them to "tight" and then used Loctite to hold them and for the through bolts I use a self locking nut on the other end and torque to the same "tight" specs.

 

[V8 Rumble]

I torque them to tight also.

 

[565bbchevy]

I didn't realize this was for a LS swap, these are from LS1Tech

Engine Mount Stud-to-Engine Block - 37 lb ft

Engine Mount Through Bolts - 70 lb ft

Engine Mount Through Bolt Nuts - 59 lb ft

Engine Mount-to-Engine Block Bolts - 37 lb ft

 

[SUBLIME80BU]

i posted this in the wrong place, it is not a ls swap, its a 350 swap. sorry for the confusion.

 

[565bbchevy]

i posted this in the wrong place, it is not a ls swap, its a 350 swap. sorry for the confusion.

All right then back to my first post "tight"

 

[SUBLIME80BU]

Right on, thank you!