need advise on a tpi build up and heads/manifolds

[Silent viewer]

i have looked into allot of that software, i wanna try it but i feel like i am so busy with life any more that even if i bought it i might never get to tuning it, i guess we will see when i get to that point. the chip i have now i think will go in the 442 the tpi setup and then go to the stealth ram on the regal. i just need to find a used stealth ram for a good price. is this ram jet cam i have pretty decent? the ram jet is rated at 350 horse, i was just reading about it and my long block is exactly what a ram jet is but i am gonna use the stealth ram and 58mm throttle body so i would almost have to think it would be a little higher then 350? i really wanted to do a lt4 hot cam but then i have machine work, springs, spacers, locks...... i just went through that in my boat, i bought a bigger cam and ended up spending more on the heads then the 400 i dropped on the cam. but then again that cam is gonna be a huge power builder and in the boat the top end power is everything. anyone got leads on a used stealth ram manifold for vortecs?