Newly acquired 83 Buick Regal Wagon...

Status
Not open for further replies.

riceca

Apprentice
Dec 29, 2008
69
0
6
Monroe, NC
Welll.... I am working on a few small projects for the wagon and finally finished some already started projects!
-------
I have been trying to figure out what I wanted to do with the wheels.... Remember this is a budget deal...

I considered a set of GTA wheels but I was not able to really find any around here that were not beat up and all that.

2nd option I was considering was the 2001-2003 S10 ZQ8 wheel but there again... Hard to find and really didnt want to spend the money on new ones...

So... I was talking to my neighbor about it and he had the novel idea of just buying two rear wheels to replace the oversized ones. They are Pacer 5 star 15x10s on the back right now and with a 295/50 it likes to rub! Well as luck would have it I bought a set of BFG Radial T/As in 275/60R15 so I am gonna take two of those with some new 15x8 5 stars and roll on from there... Less cash outlay and I get to lower the rear of the car down to where I want it! LOL So I ordered the wheels tonight and should be here within a week... Cant wait for it!

-------

So with that situated I have a few other small projects going on . I got the PS pump installed with a new pulley and new belt with no leaks so that is great! The thing fought me the whole way.

I have also been wanting to add a few necessary gauges to the car since I bought it. So I found some autometer gauges on ebay on deal so I got those. Oil pressure and Water temp. Working on getting those installed now. I also had a autometer 5 inch tach from a past project so I swapped out the junk tach that was there while I was at it...

I should have some new pics up soon! I am bad about not taking pics when I work! Gotta do better with that.

lata
CHRIS
 

riceca

Apprentice
Dec 29, 2008
69
0
6
Monroe, NC
Got to work on the wagon today!

You need replacement rear hatch rubber seal for your G body Wagon? Go to a pick and pull and get your own! Bout the only thing a Dodge Caravan can do right! LOL Cheap too!
So I went to the junk yard today and came back with a few Caravan hatch seals! Guess what I paid??? LOL
20131120_183726_zps55f30909.jpg


Got my upgraded steering shaft...aka Jeep Cherokee steering shaft from a board member... Just need to install it.
20131120_184015_zpsb9ab306c.jpg


With no air in the air shocks it actually sits pretty decent... But it also sits right on the HUGE rear tires (295/50s on 15x10s) I am replacing these with some 8s and some 275/60s very soon Anyone want these?
20131120_183641_zps4476c9db.jpg

20131120_183620_zps07dcc840.jpg


Yeah 5" tach might be a little large but when it came out of the "pulled off old car bin so it is free" I LIKE IT! Only had to take it apart and do some rewiring since it came out of a 4 cylinder car Works like a charm now!
20131120_183503_zps34df8b3c.jpg


Autometer Sport Comp 2 5/8" oil pressure and water temp gauges soon to be installed... Got to modify the black shifter cover under it to fit the gauge panel like I want it. Getting there though!
20131120_183444_zpsf6577859.jpg


Enough pic whoring... LOL

ENJOY!

lata
CHRIS
 

Longroof79

Rocket Powered Basset Hound
Oct 14, 2008
12,191
9,831
113
Gainesville, Fl
Lookin' good Chris.
Keep the progress comin'. :wink:
 

BuWaGone

Greasemonkey
Aug 11, 2013
130
1
16
Oahu, Hawaii
Looking good so far. The new lower stance is a hundred times better. I think just going to a 275 on the 10s would be able to tuck the top edge of the tire.
 

liquidh8

Comic Book Super Hero
Looking good. From that rear shot it looked just like my Century wagon, color and all. lol.

Oh, and WE ALL like pics! So keep em coming! :D
 

riceca

Apprentice
Dec 29, 2008
69
0
6
Monroe, NC
Guess what came today............................. :D

20131121_184440_zpsee56d9c4.jpg


20131121_184432_zpsb3387adf.jpg


Yup.... They sure did.... :D

lata
CHRIS
 

riceca

Apprentice
Dec 29, 2008
69
0
6
Monroe, NC
Also.... I was able to take a few minutes at work to work on my shifter console modifications to fit in the gauge panel under the dash. I still need to work on it a little bit more. But I would rather make small mods than big ones and make it look like total crap! LOL

I am sure you get the idea... Tinted windows and dark garage makes for hard picture taking... LOL

20131121_184936_zps4edf2e2d.jpg


20131121_185036_zps82ebc70f.jpg


20131121_185104_zpsb17e78ed.jpg


lata
CHRIS
 
Status
Not open for further replies.

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor