No 4th gear

[Macguyver]

We have had this happen a couple times over the years on fresh builds. Oddly enough it took a few pulls at WOT in third to shift into 4th. Not sure of the science behind it but it has worked for us. Although the cars had 4.88 and 5.13 gears. Could be a scary ride with a highway gear.

 

[462cutty]

We have had this happen a couple times over the years on fresh builds. Oddly enough it took a few pulls at WOT in third to shift into 4th. Not sure of the science behind it but it has worked for us. Although the cars had 4.88 and 5.13 gears. Could be a scary ride with a highway gear.

Really? It’s worth a shot. I’ll give it a few pulls this evening and see what happens

 

[fleming442]

Send It!!!

 

[303'505rollin]

Fluid level?

 

[MrSony]

if it's ****ed its ****ed

****in send it bruh

 

[64nailhead]

Hook up a line pressure gauge to be sure of what the pressures are, especially if you plan to pull it. Check the pressure at idle in every gear and then when driving.

 

[462cutty]

Send It!!!

Lol. I sent it last night. I did 4 wot runs to 100 atleast(needle pegged) and it just keeps pulling in 3rd. No slipping or anything just no OD.

 

[462cutty]

Hook up a line pressure gauge to be sure of what the pressures are, especially if you plan to pull it. Check the pressure at idle in every gear and then when driving.

I’ll do that today

 

[olds307 and 403]

What motor is this behind?

 

[462cutty]

What motor is this behind?

It's a roller cammed 355