Pictures of lowered cars

[dfast1]

2 inch drop spindles on front 2 drop springs on the back.

 

[fleming442]

You sir are correct! Good eye! Do you attend the events?

i went once. It's a big event, for sure.

 

[abbey castro]

Cut the original coils using a hack saw, by 1.74in ended up like this. Also installed the Blazer spindles w/ dual piston calipers. Yup cheapo lowering!

 

[crotchss]

2" drop spindles with Moog 5662 front
2" UMI drop springs rear
Had 245/45r17s and 285/40r17s back then

 

[michmalibuman]

2 inch drop spindles on front 2 drop springs on the back.


View attachment 104221

I like it, What size tries and wheels

 

[383_StealthRam]

This is 1" drop FRT & RR from original stock height adjusted with QA1 Level 3 Coil Over kit.

Using 2WD Blazer Front Brake and Steering Knuckles

 

[87monteSSMN]

This is 1" drop FRT & RR from original stock height adjusted with QA1 Level 3 Coil Over kit.

Using 2WD Blazer Front Brake and Steering Knuckles

View attachment 104351

What size front tires? I run 235 60 15s

 

[383_StealthRam]

What size front tires? I run 235 60 15s

22560R15 fronts, and 24560R15 out back, those are Wheel Vintiques 15x7 SS3's however they're 4.25" backspace (vs the 15x7 OEM 442 wheels which are 4.00" bs).

I'm planning to upgrade this spring to the US Mags U437 wheels in 17x8 all around with (likely) 235/45ZR17.

 

[87monteSSMN]

Would you say the blazer spindles and A arms add or detract from 1"? I thought the QA1 arms were non adjustable

 

[el camino ss 84]

Here's my Malibu it has a 1inch drop front and back with umi lowering springs . I hope once I get everything install it will drop the front end some. If it doesnt then im going to have to install 2inch drop spindles to get the stance I'm looking for.