Project first muscle build Skull wagon

[L.A.X-RATED]

Oooow lm7!!!! The plot thickens....niCE.please keep it fi'd,I'm looking to put one(lm7)in my 86 k5.keep us updated! 8)

 

[Mystery_man]

Kansas that would be awesome. Anything helps and yes this is a drive by wire motor. I plan on keeping it that way. I was going to get the pedal setup and the harness.

I havent been taking a lot of pics ,so I will be buying a camera and doing how tos on everything I do to help out the community.

 

[Kansas Bu Wagon]

Alright.

Stuff from Jegs:

Chevorlet oil pan kit Link: http://www.jegs.com/i/Chevrolet+Perform ... 3/10002/-1

TransDapt 1" setback mounts Link: http://www.jegs.com/i/Trans+Dapt/969/4595/10002/-1

Hedman Hedders LS to G-Body Link: http://www.jegs.com/i/Hedman+Husler/502/45010/10002/-1


Stuff from RockAuto:

Astro Fuel tank sending unit Link: http://www.rockauto.com/catalog/x,carco ... ttype,4436

From psiconversion.com:

Corvette filter/regulator Link: http://secure.ultracart.com/catalog/PSI ... -1028.html


A site I found last night that could help with your DBW: http://www.psiconversion.com/index.html

And of course LS1tech.com

And if anyone has experience with these things or has found better prices feel free to PM me or if Mystery man doesn't mind post in here.

 

[Mystery_man]

Sweet I will go threw it all and soak it all up. I came across a very good site. LT1swaps.com I am trying to find a good camera, so I can start taking more pics of my progress but these things aren't cheap for good ones.

If anyone has info or knowledge that would help me in the build post up. Thanks for everyones help so far.

 

[Mystery_man]

Well project is on hold till I am moved. I will be home in Ohio in two weeks and from there I have to set up my new garage. Im thinking about starting a frame off restoration.

 

[malibuSSwagon]

Did you make any progress on retro-fitting your fuel tank with the Astro van sender? I know an internally mounted fuel pump is ideal, however I was just going to use a weld on sump to solve the baffle issue.

Good luck on your move.

 

[Mystery_man]

Well got to Ohio I am finally starting on the garage, so I can get back to the wagon.

 

[Mystery_man]

Well the work on the wagon is going slow but atleast still going. On the hunt for a 12 bolt and 4l80e. I will be taking the harness to get modded the begining of april and he has an ecu for me. Same guy will be tuning it for me. I am trying to figure out what tank I need or if I can mod mine.

 

[Mystery_man]

Ok guys need a bit of help. I am trying to decide on a transmission. I was thinking 4l80e, but have been told it is heavy and takes power more than a 4l60e. Which one would be better for twin turbos and around 600 -700 hp.

 

[Mystery_man]

Info so I don't forget and if others want it. I will update it with my parts list for the same.


04 Yukon 5.3
need pedal assembly and harness for drive by wire
94 Astro van tbi fuel sender fits Malibu tank